Position: Home > > Industrial on-line and process control > Other industrial on-line analyzer > MD-S800E Digital Pressure Controller

MD-S800E Digital Pressure Controller

Product ID:ZXQT048

US$0.00 ~ US$1.00 PDF Format
Supply Ability:80SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Brand NameSHANGHAIMINGKONG
    Payment TermsT/T, paypal
    Model NumberMD-S800E
    MD-S800E Digital Pressure Controller
    Introduction
    The MD-S800E pressure controller is a digital display pressure controller with 80mm 304 casing. It integrates pressure measurement, display and control into a high-precision intelligent controller. The main applications are various water treatment systems, electromechanical equipment automation, and construction machinery. , medical equipment and other industries fully automatic control operation.
    It can measure: water, air, hydraulic oil and other media that are non-corrosive to stainless steel.
    The main functions realized are low pressure closing, high pressure opening (or low pressure opening, high pressure closing) function;
    In the system function, you can set password protection, reverse control, leakage protection, time protection, delay action, etc. It is a true intelligent pressure controller.
     
    Feature
    ☆ 80mm stainless steel case stainless steel connector
    ☆ The upper and lower limits of the two pressure control points can be freely set and adjusted to meet different control requirements.
    ☆ 4-digit LED real-time digital display pressure value, easy for users to observe.
    ☆ Three pressure units are available for switching.
    ☆ Built-in relay signal output, anti-backlash setting to avoid frequent movement of the controlled device.
    ☆ The service life is longer than the traditional mechanical switch, and it will not be ineffective for long-term use.
    ☆ Control accuracy is higher than traditional mechanical switches, no noise.
    ☆ Shockproof, strong anti-interference, fast response and stable performance.
     
    Technical Parameters
    Pressure range
    Negative pressure: 0~-100kPa (0~-0.1MPa)
    General: 0-0.2...0.6...1.0...1.6...2.5...5...10...25...40...60...100...160Mpa
    Micro pressure: 0-5kPa...10...25...50...100kPa
    Output form: Relay output, normally open normally closed
    Output relay capacity: 220V AC 5A
    Power supply: 220V AC; 24V DC; 380V AC optional
    Setting range: The control point can be set for the full range segment and the anti-fluctuation hysteresis setting can be set.
    Accuracy: 0.5% FS
    Measuring medium: gas, water, oil
    Operating temperature: -20 ~ 65 ° C
    Interface size: G1/2 (four-way water pipe thread)
                                         M20*1.5 (pressure gauge interface)
                                         G1/4 (two-pipe thread)

Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com