MD-S280-DP differential pressure digital pressure gauge Introduction
The differential pressure digital pressure gauge is a high-precision intelligent digital pressure gauge specially designed to measure the pressure difference between the two ends. The built-in high-precision diffused silicon pressure sensor can accurately display the pressure difference in real time, and has high precision and long-term. Good stability.
This differential pressure digital pressure gauge is equipped with a large LCD display with clear, backlight, switch, unit switching,
Low-voltage alarm and other functions, easy to operate and easy to install.
The product also has a maximum value minimum record function that is used as a peak record table.
The product adopts 304 stainless steel shell and joint, which has good shock resistance and can measure gas, liquid, oil and other non-corrosive medium for stainless steel.
Widely used in the measurement of gas and liquid pressure. Mainly used to measure the double end pressure difference.
Feature
☆ 304 stainless steel case, beautiful product
☆ LCD screen, white backlight
☆ Unit switching, clearing, backlighting, switching machine, maximum value minimum record, etc.
☆ Low power design, battery powered, up to 12-24 months
☆ Product Certification: CE Certification Intrinsically Safe Explosion Certification Exib IICT4
Technical Parameters
Range: (0~10...25...40...60...100...250...400...600)kPa
(0~1...1.6) MPa
Overload pressure: diaphragm differential pressure 200% (positive overpressure); 100% (negative overvoltage) single crystal silicon differential pressure 16Mpa
Backlight color: white backlight
Dial size: 80mm
Accuracy level: 0.2% FS; 0.4% FS
Long-term stability: typical: ± 0.2% FS / year
Working temperature: -20 ~ 85 ° C
Compensation temperature: 0 ~ 40 °C
Electrical protection: anti-electromagnetic interference design
Sampling frequency: 3 times / sec
Measuring medium: gas or liquid compatible with 316 stainless steel
Pressure interface: G1/4 internal thread, NPT1/4
Connector material: 304 stainless steel
Shell material: 304 stainless steel
Product function: power on/off backlight back to zero unit switching maximum value minimum record
Supply voltage: 3V (subject to product labeling)
Battery display: four-segment display
Product Certification: CE Certification Explosion-proof Certification (Exib IICT4)