CS350Pro Electrochemical Workstation Introduction: The CS350Pro electrochemical workstation is an upgraded version of the CS conventional electrochemical workstation, featuring excellent stability and precision, advanced hardware, and comprehensive software. It provides a scientific research platform for scientists and researchers in fields such as energy, materials, life sciences, and environmental protection. Specifically applied to: 1) Testing of new energy materials, including lithium-ion batteries, solar cells, fuel cells, supercapacitors, advanced functional materials, and optoelectronic materials; 2) Electrocatalytic testing, including nitrate reduction, carbon dioxide reduction, and hydrogen production from water electrolysis; 3) Corrosion research and corrosion resistance evaluation of metal materials in different media (water/concrete/soil, etc.); 5) Rapid evaluation of corrosion inhibitors, water stabilizers, coatings, and cathodic protection efficiency. Technical Specifications: Constant potential control range: ±10V Constant current control range: ±2A Potential control accuracy: 0.1% of the range scale ±1mV Current control accuracy: 0.1% of the measurement range Potential resolution: 1μV Current sensitivity: 1pA Potential rise time: ≤1μs Input impedance of reference electrode: 1013Ω||5pF Input bias current: ≤10pA Voltage measurement range: ±200mV, ±2.5V, ±5V, ±10V, with a total of 4 levels Current measurement range: ±200pA to ±2 A, with 11 levels in total Cell voltage: ±30V Maximum output current: ±2A Interface communication modes: USB2.0, RJ45 Ethernet port CV and LSV scanning rate: 0.001mV/s to 10kV/s CA and CC pulse width: 0.0001 to 65000 seconds Current scanning increment: 1mA @1A/ms Potential increment during potential scanning: 0.020mV @1V/ms SWV frequency: 0.001~100kHz Pulse width of DPV and NPV: 0.001 to 100 seconds AD data acquisition: 16bit@1MHz, 20bit @1KHz DA resolution: 20bit Minimum potential increment of CV: 0.020mV Low-pass filter: 7-segment programmable Current and potential range: manual/automatic switching Electrode structure: 2, 3, 4 electrode configuration Grounding method: floating or grounded, supporting zero-impedance ammeter
CS350Pro Electrochemical Workstation Introduction: The CS350Pro electrochemical workstation is an upgraded version of the CS conventional electrochemical workstation, featuring excellent stability and precision, advanced hardware, and comprehensive software. It provides a scientific research platform for scientists and researchers in fields such as energy, materials, life sciences, and environmental protection. Specifically applied to: 1) Testing of new energy materials, including lithium-ion batteries, solar cells, fuel cells, supercapacitors, advanced functional materials, and optoelectronic materials; 2) Electrocatalytic testing, including nitrate reduction, carbon dioxide reduction, and hydrogen production from water electrolysis; 3) Corrosion research and corrosion resistance evaluation of metal materials in different media (water/concrete/soil, etc.); 5) Rapid evaluation of corrosion inhibitors, water stabilizers, coatings, and cathodic protection efficiency.
