Position: Home > > Sensors and Transmitters > Other sensor > ZE730-CO Electrochemical Carbon Monoxide Module

ZE730-CO Electrochemical Carbon Monoxide Module

Product ID:CHGOTHER018

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberZE730-CO
    Brand NameZHENGZHOUWEISHENG
    Payment TermsT/T, paypal
    ZE730-CO Electrochemical Carbon Monoxide Module
    Introduction:
    ZE730-CO is a universal and miniaturized gas detection module. This module is equipped with a fuel cell type electrochemical buckle sensor, which not only has low power consumption but also effectively avoids the risk of liquid leakage from traditional electrochemical sensors. In terms of circuit, Instrumentation amplifier, high-precision AD converter, etc. are used to convert the detected gas concentration into digital signals, and data transmission can be carried out through serial port, PWM and other signals. Not only the signal is stable, but also multiple choices can be made. Mainly used in vehicle lithium battery failure detection, smart home CO gas detection, portable carbon monoxide detector, and other aspects.
    Features:
    High temperature resistance, fast response,
    Low power consumption, high accuracy,
    Long lifespan
    Technical parameters:
    Product model: ZE730-CO
    Detection gas: carbon monoxide
    Interference gases: hydrogen, ethylene, and other gases
    Output method: UART/PWM
    Working voltage: 5V ± 0.5V DC
    Preheating time: 3 minutes
    Response time: 40s
    Recovery time: 1 minute
    Range: 0-1000ppm
    Resolution: 1ppm
    Working temperature: -20 ~80
    Working humidity: 15% RH-90% RH (without condensation)
    Storage temperature: -10 ~55
    Storage humidity: 30%~60% RH
    Service life: 10 years (in air)

  • Introduction:
    ZE730-CO is a universal and miniaturized gas detection module. This module is equipped with a fuel cell type electrochemical buckle sensor, which not only has low power consumption but also effectively avoids the risk of liquid leakage from traditional electrochemical sensors. In terms of circuit, Instrumentation amplifier, high-precision AD converter, etc. are used to convert the detected gas concentration into digital signals, and data transmission can be carried out through serial port, PWM and other signals. Not only the signal is stable, but also multiple choices can be made. Mainly used in vehicle lithium battery failure detection, smart home CO gas detection, portable carbon monoxide detector, and other aspects.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com