SYS320A Wireless high and low voltage electrical phase checker
Introduction: SYS320A Wireless high and low voltage electrical phase checker is also known as full intelligent wireless high voltage voice nuclear phase instrument, wireless high voltage nuclear phase device, referred to as nuclear phase instrument or nuclear phase device, consisting of wireless receiver, detector, telescopic insulation rod and so on. The receiver adopts a 3.5-inch true color LCD screen, and displays the nuclear phase result, phase, frequency and vector diagram indication on the same screen. There are voice prompts such as “X signal normal, Y signal normal, in phase, out of phase”, which are clear and intuitive. The open core nuclear phase distance can reach 160m, and it can fully intelligent nuclear phase for voltage lines from 10V to 550kV. Among them, bare wires of 35kV and below can directly contact the nuclear phase, and bare wires of 35kV or above adopt non-contact nuclear phase, non-contact. The nuclear phase is to gradually bring the detector closer to the wire to be tested. When the electric field signal is sensed, the nuclear phase can be completed, so that it is safer to directly contact the high-voltage wire! The nuclear phase meter has the functions of high-voltage electroscope, high-voltage phase meter and high-voltage phase sequence meter, which can be used for electroscope, phase sequence test, transformer group judgment and so on. Technical Parameters: Function: High and low voltage wireless voice phase, frequency, phase, phase sequence, electroscope test Power: DC 3.7V rechargeable lithium battery, USB charging interface, continuous operation for about 10 hours Transmission method: 315MHz, 433MHz wireless transmission Nuclear phase distance: about 160m Display mode: 3.5 inch true color LCD display Range: Nuclear phase voltage level: AC 10V ~ 550kV Phase: 0.0° to 360.0° Frequency: 45Hz ~ 75Hz Resolution: 0.1°; 0.1Hz Accuracy: Phase: ≤ ± 10 ° (23 ° C ± 5 ° C, below 80% RH) Frequency: ≤±2Hz (23°C±5°C, 80% RH or less) Differentiate qualitative: in phase: -30 ° ~ 30 °; out of phase: 90 ° ~ 150 ° and 210 ° ~ 270 ° Voice function: In-phase, out-of-phase, normal X signal, normal Y signal, etc. Insulation rod size: about 3 meters long after stretching; about 0.6 meters long after shrinking (optional five-meter operating rod) Data Storage: 9999 Group Nuclear phase: Contact nuclear phase: bare wire below 35kV, or wire with safety insulation sheath below 110kV directly in contact with the nuclear phase. (with insulation rod operation) Non-nuclear phase: bare wire above 35kV, or non-contact core phase above 110kV. (with insulation rod operation) Power inspection instructions: Detector "beep--beep--beep" beep Shift: Automatic shifting Sampling rate: 2 times / sec Meter size: Detector: length and width 145mm × 60mm × 48mm Receiver: length, width, thickness, 250mm × 100mm × 40mm
Introduction: SYS320A Wireless high and low voltage electrical phase checker is also known as full intelligent wireless high voltage voice nuclear phase instrument, wireless high voltage nuclear phase device, referred to as nuclear phase instrument or nuclear phase device, consisting of wireless receiver, detector, telescopic insulation rod and so on. The receiver adopts a 3.5-inch true color LCD screen, and displays the nuclear phase result, phase, frequency and vector diagram indication on the same screen. There are voice prompts such as “X signal normal, Y signal normal, in phase, out of phase”, which are clear and intuitive. The open core nuclear phase distance can reach 160m, and it can fully intelligent nuclear phase for voltage lines from 10V to 550kV. Among them, bare wires of 35kV and below can directly contact the nuclear phase, and bare wires of 35kV or above adopt non-contact nuclear phase, non-contact. The nuclear phase is to gradually bring the detector closer to the wire to be tested. When the electric field signal is sensed, the nuclear phase can be completed, so that it is safer to directly contact the high-voltage wire! The nuclear phase meter has the functions of high-voltage electroscope, high-voltage phase meter and high-voltage phase sequence meter, which can be used for electroscope, phase sequence test, transformer group judgment and so on.
