Introduction: The design of the instrument takes into account the GB / T11143, GB / T5096, SH / T 0023 three standards, is a multi-purpose oil corrosion corrosion analysis equipment. The instrument can be used in accordance with the national standard GB / T11143 "plus inhibition of mineral oil in the presence of water in the presence of anti-rust performance test method" to assess the inhibitor of mineral oil, especially turbine oil mixed with water, the iron parts of the rust Capacity; can also be used in accordance with national standards GB / T5096 "petroleum products corrosion test method" and the industry standard SH / T 0023 "jet fuel silver corrosion test method" to assess aviation gasoline, kerosene, aviation turbine fuel, , Agricultural tractors fuel, washing solvents, kerosene, distillate fuels and lubricants and other petroleum products, the corrosion of copper and silver. Features: 1, the instrument is a three-in-one, multi-purpose corrosion corrosion tester, a multi-purpose machine, cost-effective. 2, the use of digital temperature controller, heater, electric mixer composed of constant temperature bath, bath temperature uniformity; with a timer for the test when the test set and automatic timing. 3, with the United States imported standard color swatch, to meet the requirements of the test comparison. Technical Parameters: 1, the power supply voltage: 220V ± 10%, 50Hz; 2, the temperature sensor: industrial platinum resistance, the sub-degree of Pt100; 3, temperature range: 0 ~ 100 ℃ arbitrary set; 4, temperature control accuracy: ± 1 ℃; 5, the temperature display: LED digital display; 6, temperature control heating power: 600W; 7, auxiliary heating power: 1000W; 8, control time range: 1 minute to 24 hours any set; 9, time display: LED digital display; 10, Sheng hole: 4; 11, ambient temperature: room temperature ~ 35 ℃; 12, relative humidity: ≤ 85%; 13, the whole power consumption: not more than 1800W.
Introduction: The design of the instrument takes into account the GB / T11143, GB / T5096, SH / T 0023 three standards, is a multi-purpose oil corrosion corrosion analysis equipment. The instrument can be used in accordance with the national standard GB / T11143 "plus inhibition of mineral oil in the presence of water in the presence of anti-rust performance test method" to assess the inhibitor of mineral oil, especially turbine oil mixed with water, the iron parts of the rust Capacity; can also be used in accordance with national standards GB / T5096 "petroleum products corrosion test method" and the industry standard SH / T 0023 "jet fuel silver corrosion test method" to assess aviation gasoline, kerosene, aviation turbine fuel, , Agricultural tractors fuel, washing solvents, kerosene, distillate fuels and lubricants and other petroleum products, the corrosion of copper and silver.
