Position: Home > > Industry specific instrument > Oil special analytical instrument > Rust / corrosion tester > SYD-11143 Lubricant liquid phase corrosion tester

SYD-11143 Lubricant liquid phase corrosion tester

Product ID:HZSYfxfs001

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberSYD-11143
    Brand NameYIMA
    Payment TermsT/T, paypal
    Introduction:
    The instrument is designed and manufactured in accordance with the requirements of the People's Republic of China Standard GB / T11143 "Test Method for Inhibiting Mineral Oil in the Presence of Antirust Performance in the Presence of Mineral Oil". Applicable to the test method proposed according to GB / T 11143 standard to evaluate the anti-rust ability of the mineral oil, especially turbine oil, when mixed with water. Also suitable for assessing other oil, such as hydraulic oil, circulating oil and water than the water on the iron parts of the anti-rust ability.
    Features:
    1, the use of digital temperature controller, heater, electric mixer composed of constant temperature bath, bath temperature uniformity.
    2, with a timer for the test when the test set and automatic timing.
    3, with four sample test holes, four samples can be tested at the same time, the test efficiency is high.
     Technical Parameters:
    1, the power supply voltage: 220V ± 10%, 50Hz;
    2, temperature range: 0 ~ 100 ;
    3, temperature control accuracy: ± 1 ;
    4, the temperature sensor: industrial platinum resistance, grading number Pt100;
    5, the temperature display: digital display;
    6, control the time range: 1 minute to 24 hours any set;
    7, the time display: digital display;
    8, temperature control heating power: 600W;
    9, auxiliary heating power: 1000W;
    10, stirring motor speed: 1400r / min;
    11, sample stirring speed: 1000 ± 50r / min;
    12, Sheng hole: 4;
    13, ambient temperature: room temperature ~ 35 ;
    14, relative humidity: 85%;
    15, the whole power consumption: not more than 1800W.

  • Introduction:
    The instrument is designed and manufactured in accordance with the requirements of the People's Republic of China Standard GB / T11143 "Test Method for Inhibiting Mineral Oil in the Presence of Antirust Performance in the Presence of Mineral Oil". Applicable to the test method proposed according to GB / T 11143 standard to evaluate the anti-rust ability of the mineral oil, especially turbine oil, when mixed with water. Also suitable for assessing other oil, such as hydraulic oil, circulating oil and water than the water on the iron parts of the anti-rust ability.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com