Brief introduction: QT-6100A computerized universal material testing machine adopts full digital force, double closed-loop displacement control, AC motor and delta inverter control system from Taiwan, and precision reducer and ball screw drive from Taiwan to achieve high transmission efficiency and low noise. This machine is mainly used for testing the physical properties of metal and non-metal material products, such as tensile, compressive, peeling, tearing, bending, three-point bending and shearing resistance. At the same time according to GB, ISO, JIS, ASTM, DIN and user provided by a variety of standards for testing and data processing. Widely used in auto parts, fasteners, aerospace, wire and cable, rubber and plastic, paper packaging and other industries of material inspection and analysis. It is the testing equipment required by scientific research institutes, colleges and universities, industrial enterprises, technical supervision and commodity inspection and arbitration. Technical specifications: 1. Capacity selection: 20kN, 50kN, 100kN; 2. Load measurement range: 0.2% -- 100%FS 3. Accuracy level: level 1; 4. Limit of load error: plus or minus 0.1%; 5. Load decomposition degree: 1/200000; 6. Stroke: 1100mm (when clamps are not installed); 7. Effective test width: 420*420mm; 8. Test speed: 10-100mm/min; 9. Speed accuracy: plus or minus 0.5%; 10. Displacement resolution: 0.001mm; 11. Limit of displacement error: plus or minus 0.5%; 12. External dimensions: 900*600*2050mm; 13. Machine weight: 450KG 14. Power supply: 220V 50Hz 2kW;
