HWP15-10S Spontaneous ignition solid classification tester Introduction
HWP15-10S spontaneous pyrophoric solids classification tester is used to determine whether solid matter burns in contact with air. It conforms to the United Nations Recommendations on the Transport of Dangerous Goods · Test and Standard Manual 33.3.1.4 Test N2: Test Method for Pyrophoric Solids T 21611-2008 "Test method for spontaneous combustion of flammable solids for dangerous goods". The instrument is mainly composed of a test bench and a control part. It can automatically judge whether the test substance burns, and automatically time it. The test data can be sent to the microcomputer through the serial port. Features
1) Embedded processor, Windows CE operating system;
2) 8-inch LCD touch screen, which can display test status in real time;
3) Equipped with a nanosecond-level photosensitive sensor detection module to detect light intensity changes;
4) The instrument is mainly composed of a test bench and a control part, which automatically determines whether the test substance burns;
5) During the test, if the substance burns, or the substance does not burn after the test time is reached, the device automatically alarms to remind the operator that the test is over;
6) Equipped with automatic shaking and dropping device, fast and thorough sample injection;
7) Equipped with low thermal conductivity marble experimental base, long life and easy cleaning;
8) The test process is fully automated without manual intervention, and supports parameter setting, data storage, and viewing reports. Technical Parameters
Working environment: -5 ℃ ～ 45 ℃ ， <95% RH
Timing range: 0 ～ 999s
Timing display resolution: 1s
Drop height: 1m
Combustion detection response time: ≤6ms
Introduction
HWP15-10S spontaneous pyrophoric solids classification tester is used to determine whether solid matter burns in contact with air. It conforms to the United Nations Recommendations on the Transport of Dangerous Goods · Test and Standard Manual 33.3.1.4 Test N2: Test Method for Pyrophoric Solids T 21611-2008 "Test method for spontaneous combustion of flammable solids for dangerous goods". The instrument is mainly composed of a test bench and a control part. It can automatically judge whether the test substance burns, and automatically time it. The test data can be sent to the microcomputer through the serial port.
