HWP09-10S spray aerosol ignition distance tester Introduction
HWP09-10S spray aerosol ignition distance tester is used to measure the spray ignition distance of sprays. It is suitable for spray products with a spray distance of 15cm and above. HWP09-10S spray aerosol ignition distance tester conforms to the United Nations "Recommendations on the Transport of Dangerous Goods · Tests and Standards Manual" 31.4 Ignition distance test of spray aerosols and GB / T21630-2008 "Ignition distance test of dangerous goods spray method".
Feature
1) Embedded processor, Windows CE operating system;
2) 8-inch LCD touch screen, which can display test status in real time;
3) Integrate two working modes: "standard mode" and "custom mode";
4) The spray is automatically sprayed, and the spray tank clamping device can automatically realize the vertical and inverted tank body;
5) Automatic spraying timing;
6) Nanosecond-level photosensitive sensor detection module, which automatically detects whether the spray burns;
7) Driven by a hybrid stepping motor and equipped with a photoelectric encoder to achieve precise positioning of the measurement position;
8) Use ignition gun as ignition source, blue non-luminous flame, height 4-125px, flame height adjustable;
9) The test process is fully automated, without manual intervention, and supports parameter setting, data storage, and viewing reports;
10) Special fire organ cover, which can effectively prevent equipment pollution;
11) Equipped with temperature and humidity module, which can monitor the temperature and humidity of the test environment in real time.
Technical Parameters
1) Working environment: 5 ℃ ～ 30 ℃, <85% RH
2) Ambient temperature measurement range: -10 ℃ ～ + 60 ℃
3) Ambient temperature measurement accuracy: ± 0.5 ℃
4) Ambient humidity measurement range: 5 ～ 95% RH
5) Ambient humidity measurement accuracy: ± 5.0% RH
6) Combustion detection response time: ≤6ms
7) Burning detection distance: 375px-2250px
8) Positioning accuracy: ± 1mm
9) Press duration: 5s
10) Ignition method: ignition gun
11) Aerosol can positioning: the aerosol can body can be turned automatically
12) Compatible spray can sizes: height 120 ～ 400mm, diameter 30 ～ 80mm
HWP09-10S spray aerosol ignition distance tester is used to measure the spray ignition distance of sprays. It is suitable for spray products with a spray distance of 15cm and above. HWP09-10S spray aerosol ignition distance tester conforms to the United Nations "Recommendations on the Transport of Dangerous Goods · Tests and Standards Manual" 31.4 Ignition distance test of spray aerosols and GB / T21630-2008 "Ignition distance test of dangerous goods spray method".
