Introduction: CS electrochemical workstation adopts fully floating design, with excellent stability and accuracy, advanced hardware and well-functioning software, providing excellent scientific research for scientific and technological workers involved in energy, materials, life science, environmental protection and other fields platform. Applications: (1) Performance research of energy materials (lithium-ion batteries, solar cells, fuel power cells and supercapacitors, etc.), advanced functional materials and sensors; (2) electrochemical analysis research; (3) electrosynthesis, electrodeposition ( Electroplating), anodizing, electrolysis and other reaction mechanisms; (4) corrosion behavior research and corrosion resistance evaluation of metal materials; (5) rapid evaluation of corrosion inhibitors, water quality stabilizers, coatings and cathodic protection efficiency. Features: 1. Dual-channel correlation analyzer and dual-channel high-speed 16bit/high-precision 24bit AD converter 2. Built-in FRA frequency response analyzer, frequency range 10μHz ~1MHz 3. Amplifier with high bandwidth and high input impedance 4. Built-in FPGA DDS signal synthesizer 5. High power potentiostat/galvanostat/zero resistance ammeter 6. Voltage control range: ±10V, tank voltage is ±21V 7. Current control range: ±2.0A 8. Potential resolution: 10μV, current resolution: 1pA (extendable to 100fA) Technical parameter: Potentiostatic control range: ±10V Potential control accuracy: 0.1% × full scale reading ±1mV Potential Sensitivity: 10μV(>100Hz), 3μV(<10Hz) Potential rise time: <1μS (<10mA), <10μS (<2A) Reference electrode input impedance: 1012Ω||20pF Slot voltage output: ±21V CV and LSV scanning speed: 0.001mV～10000V/s CA and CC pulse width: 0.0001～65000s SWV frequency: 0.001～100KHz AD data acquisition: 16bit@3.6MHz, 20bit@1KHz DA resolution: 16bit, setup time: 1μS Communication interface: USB2.0, RJ45 network port Dimensions (cm): 36.4(W)*32.0(D)*13.8(H) Constant current control range: ±2.0A Current control accuracy: 0.1% x full scale reading Current sensitivity: 1pA Current range: 2nA～2A, 10 levels in total Maximum output current: 2.0A Current sweep increment: 1mA @1A/mS Potential sweep potential increment: 0.076mV @1V/mS DPV and NPV pulse width: 0.0001～1000s Minimum potential increment of CV: 0.020mV Current and Potential Range: Automatically set Low-pass filter: 8-segment programmable Instrument weight: 7.6Kg
Introduction: CS electrochemical workstation adopts fully floating design, with excellent stability and accuracy, advanced hardware and well-functioning software, providing excellent scientific research for scientific and technological workers involved in energy, materials, life science, environmental protection and other fields platform. Applications: (1) Performance research of energy materials (lithium-ion batteries, solar cells, fuel power cells and supercapacitors, etc.), advanced functional materials and sensors; (2) electrochemical analysis research; (3) electrosynthesis, electrodeposition ( Electroplating), anodizing, electrolysis and other reaction mechanisms; (4) corrosion behavior research and corrosion resistance evaluation of metal materials; (5) rapid evaluation of corrosion inhibitors, water quality stabilizers, coatings and cathodic protection efficiency.
