Brief introduction: ZY6166C solid material smoke density meter is based on Standard GB/T10671-2008 "the solid material to produce smoke than light density test method and ASTM E 662:2006" Standard test method forspecificoptical density of smoke generated by solid materials "in the technical conditions stipulated in the development of a new type of solid material was developed for the determination of smoke density test equipment, the standards applicable to the determination of smoke produced during the combustion of solid materials than light density, and the biggest than light density of the test results. It is used to assess smoke properties of plastic under prescribed conditions. The instrument by the airtight test chamber, photometer measurement system, heating system, test box, stents, optical measurement system and smoke density test software; Circuit developed by single chip microcomputer, computer control, high technical content, performance is stable. This instrument is suitable for all solid materials, also can be applied to other materials of assessment (such as rubber, textiles, covers, paint, wood and other materials), by solid materials industry production factories and research of the unit is widely used. Technical indicators: Light transmittance resolution: 0.0001%; Measuring range: 0-100%; When measuring the automatic shift. Measuring accuracy: + / - 3%; Working voltage: AC200 50 hz - 240 - v; Environmental humidity: at room temperature to 40 ℃ Work environment: the instrument is running, should avoid direct light, no forced air flow phenomenon.
Brief introduction: ZY6166C solid material smoke density meter is based on Standard GB/T10671-2008 "the solid material to produce smoke than light density test method and ASTM E 662:2006" Standard test method forspecificoptical density of smoke generated by solid materials "in the technical conditions stipulated in the development of a new type of solid material was developed for the determination of smoke density test equipment, the standards applicable to the determination of smoke produced during the combustion of solid materials than light density, and the biggest than light density of the test results.It is used to assess smoke properties of plastic under prescribed conditions. The instrument by the airtight test chamber, photometer measurement system, heating system, test box, stents, optical measurement system and smoke density test software; Circuit developed by single chip microcomputer, computer control, high technical content, performance is stable. This instrument is suitable for all solid materials, also can be applied to other materials of assessment (such as rubber, textiles, covers, paint, wood and other materials), by solid materials industry production factories and research of the unit is widely used.
