Introduction: The iron analyzer is a new method of mechanical wear monitoring invented in the 1970s. The basic principle and method of the pyrometer is to separate the debris and debris from the lubricating oil or hydraulic oil by means of magnetic force. The size of the order, do not overlap on a transparent substrate (that is, the production of iron tablets), with the iron microscope to observe the qualitative analysis. YTF-8 double analysis of iron spectrometer using high gradient, strong magnetic field of the machine lubricating oil in the ferromagnetic and paramagnetic abrasive particles separated by the size of their particles in the order of deposition on the iron spectrum, with the iron spectrum analysis can be The morphology, size, composition and quantity of wear particles were observed and analyzed. Features: 1, through the system spectrum, can quickly determine the operation of the equipment and wear status, oil trends; with iron spectrum analysis software, can accurately determine the wear and tear failure parts and reasons 2, the new high-performance, low-power core, anti-electromagnetic interference ability 3, the use of independent gas supply system to ensure that the two sets of spectrum between the gas transmission does not interfere with each other to overcome the equipment for a long time, arctic, extremely hot when the leak or jam problem; 4,1 ~ 99 knob speed control with key speed control, cutting speed control to control more convenient; 5, comes with slowdown mode, which can effectively improve the success rate of the spectrum, and real-time adjustment of the speed value; 6, can produce two iron spectrum at the same time, to improve the rate of the system; Technical Parameters: Product size: 400 mm × 390 mm × 363 mm Product weight: 18.5 kg Oil consumption: 2-3ml Solvent dosage: 1-20ml Use solvent: tetrachlorethylene (analytical grade) Speed control: 1 ~ 99 speed control Adjustment mode: knob adjustment / button adjustment Method time: ≤ 20min Spectral angle: 2 ° ~ 4 ° Magnetic field strength: 1.5T Magnetic field gradient: 5.0T / cm Display parameters: 240 * 128 industrial LCD LCD screen Ambient temperature: -20 ° ~ 50 ° Ambient humidity: 30% to 85%
Introduction: The iron analyzer is a new method of mechanical wear monitoring invented in the 1970s. The basic principle and method of the pyrometer is to separate the debris and debris from the lubricating oil or hydraulic oil by means of magnetic force. The size of the order, do not overlap on a transparent substrate (that is, the production of iron tablets), with the iron microscope to observe the qualitative analysis. YTF-8 double analysis of iron spectrometer using high gradient, strong magnetic field of the machine lubricating oil in the ferromagnetic and paramagnetic abrasive particles separated by the size of their particles in the order of deposition on the iron spectrum, with the iron spectrum analysis can be The morphology, size, composition and quantity of wear particles were observed and analyzed.
