Introduction: The oil sample from the machine lubrication system flows into the glass deposition tube located above the slit of the high gradient strong magnetic field under the action of siphon. The abrasive grains in the oil sample are arranged in different positions according to the size of the inner wall of the deposition tube under the magnetic field. The abrasive deposition amount is then measured by photoelectric principle and the Dl and Ds, Is equivalents are directly displayed by the microcomputer and the electronic system. Features: 1. Can store 8,000 measurement data, and the measured data can be routinely calculated and printed to save. 2.RS232 interface, two-way transmission, which can upload data to the PC, but also through the RS232 interface control equipment. 3.USB interface, easy to import data into the U disk, easy to carry (only YTZ-5, YTZ-6 have this feature). 4. Network interface, you can access the device through the LAN data stored in the Internet can also be used to achieve remote access to data (only YTZ-6 has this feature). 5. The instrument has matching software, user-friendly data processing and analysis report. 6. The instrument is equipped with automatic zero adjustment system, the use of extremely convenient to speed up the analysis speed. 7. The display shows 8 parameters such as DL, Ds, DL-DS, DL + DS, (DL-DS) / DS, (DL-DS) × DL. Technical Parameters: Magnetic field: Maximum magnetic flux density ≈ 1.8T Maximum magnetic field gradient> 0.5T / mm Deposition tube size: φ3 / φ1.7 × 100mm Capillary size: φ1.2 / φ0.8 × 700mm Zero mode: automatic Readings show: 31 / 2LED Reading accuracy: 0.1 straight reading Display: LCD240 * 128 digital display
Introduction: The oil sample from the machine lubrication system flows into the glass deposition tube located above the slit of the high gradient strong magnetic field under the action of siphon. The abrasive grains in the oil sample are arranged in different positions according to the size of the inner wall of the deposition tube under the magnetic field. The abrasive deposition amount is then measured by photoelectric principle and the Dl and Ds, Is equivalents are directly displayed by the microcomputer and the electronic system.
