YT8500 split dual purpose coating thickness gauge Introduction: The professional split dual purpose coating thickness gauge YT8500 is a domestically produced coating thickness gauge manufactured by 3nh company with fully independent intellectual property rights. It can quickly and accurately non-destructive test the thickness of various coatings applied on metal substrates. The YT8500 coating thickness gauge fully complies with the magnetic and eddy current testing principles specified in standards such as ISO 2178, ISO 2360, GB/T 4956, GB/T 4957, and ASTM B499. The professional split dual purpose coating thickness gauge YT8500 has precise measurement, large testing range, multiple calibration modes, multiple measurement modes, convenient positioning, and powerful functions. It is widely used in surface engineering testing fields such as manufacturing, metal processing, and chemical industries, and is a basic equipment in the coating surface treatment industry. Fe based probes can detect the thickness of various non-magnetic coatings sprayed on various magnetic substrates (such as steel), such as the paint layer, powder spraying layer, ceramic coating layer, chromium plating layer, copper plating layer, zinc plating layer, etc. of iron plates. NFe based probes detect the thickness of all insulation coatings sprayed on non magnetic metal substrates (such as aluminum, copper, brass, stainless steel, etc.), such as paint layers, powder spraying layers, ceramic coating layers, etc. Features: 1. Large Range 5000 μ M Maximum measurement thickness 5000 microns 2. Supports zero, single, and five point calibration Supports multiple calibration methods, making testing more convenient and meeting higher testing accuracy requirements 3. IPS pure color screen, smooth operation, and large storage capacity 4. Rich measurement modes The coating thickness gauge YT8500 has a selection of basic mode, quality control mode, continuous mode, and statistical mode to adapt to more testing scenarios 5. Non destructive testing, automatic identification of substrate type The coating thickness gauge YT8500 can automatically identify magnetic and non-magnetic substrates, and non-destructive testing does not damage samples, improving testing speed 6. Accurate measurement of surface planes Convex radius of 5mm; Concave radius 10mm 7. High sensitivity probe Independently developed high sensitivity probe with fast response speed and more accurate testing 8. Supports Bluetooth, mobile apps, and WeChat mini programs with more extended functions The measurement data can be instantly transmitted to the mobile phone through Bluetooth for corresponding data editing and processing, and test reports can be output. Technical parameters: Product model: YT8500 Product name: Professional split dual purpose coating thickness gauge Conforming to standards: ASTM B499, ASTM D1400, ASTM D709; ISO 2178, ISO 2360, ISO 2808; GB/T 4956, JB/T 8393 Matrix mode: iron based/non iron based Probe form: split type Resolution: 0.1 μ M Measurement range: 0-5000 μ M Measurement accuracy: Zero point correction: ± (3% H+1) μ M; Two point correction: ± (1-3% H+1.5) μ M; Note: H represents the thickness of the sample Display screen: IPS full color screen, 1.14inch Interface: Type C USB; Bluetooth 5.0; Keys Storage data: 3500 pieces, expandable massive storage through mobile app Battery capacity: Lithium battery, fully charged, can continuously test 10000 times Measurement mode: basic mode, quality control mode, continuous mode, statistical mode Minimum measurement size: Magnetic: 10 × 10mm; Non magnetic: 10 × 10mm Minimum measured thickness: magnetic: 0.2mm; Non magnetic: 0.05mm Minimum curvature: convex radius 5mm; Concave radius 10mm Display unit: μ M/mil Size: 102 × fifty × 20mm (probe Ø 18x69) Weight: 80g Working temperature: 0~40 º C (10~90% RH without condensation) Storage temperature: -10~50 º C
Introduction: The professional split dual purpose coating thickness gauge YT8500 is a domestically produced coating thickness gauge manufactured by 3nh company with fully independent intellectual property rights. It can quickly and accurately non-destructive test the thickness of various coatings applied on metal substrates. The YT8500 coating thickness gauge fully complies with the magnetic and eddy current testing principles specified in standards such as ISO 2178, ISO 2360, GB/T 4956, GB/T 4957, and ASTM B499. The professional split dual purpose coating thickness gauge YT8500 has precise measurement, large testing range, multiple calibration modes, multiple measurement modes, convenient positioning, and powerful functions. It is widely used in surface engineering testing fields such as manufacturing, metal processing, and chemical industries, and is a basic equipment in the coating surface treatment industry. Fe based probes can detect the thickness of various non-magnetic coatings sprayed on various magnetic substrates (such as steel), such as the paint layer, powder spraying layer, ceramic coating layer, chromium plating layer, copper plating layer, zinc plating layer, etc. of iron plates. NFe based probes detect the thickness of all insulation coatings sprayed on non magnetic metal substrates (such as aluminum, copper, brass, stainless steel, etc.), such as paint layers, powder spraying layers, ceramic coating layers, etc.
