Position: Home > > Industrial on-line and process control > Flow / leak > Flow rate monitor > TY-60TC oval gear flowmeter for liquid flow

TY-60TC oval gear flowmeter for liquid flow

Product ID:LLCL011

US$0.00 ~ US$1.00 PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberTY-60TC
    Brand NameDALIANTIANYANG
    Payment TermsTT,PAYPAL
    TY-60TC oval gear flowmeter
     
    Introduction:
    The working principle of the oval gear flowmeter is that the liquid pushes a pair of oval gears to rotate; the volume of each cavity is a fixed volume; the speed of the gears is drawn out, and the sensor sends out synchronization
    Pulse counting, the rotation of the oval gear is transmitted to the counter through the magnetic seal coupling and the transmission reduction mechanism to directly indicate the total amount flowing through the flowmeter. If an additional letter is sent
    After installation, it can be equipped with an electric display instrument to realize remote transmission only instantaneous flow or cumulative flow.
    Features:
    1. High measurement accuracy, wide flow range and good repeatability;
    2. The helical rotor rotates evenly, with little vibration and long service life;
    3. It is not sensitive to the viscosity change of the liquid to be measured, especially suitable for the measurement of liquids with higher viscosity;
    4. Simple structure, small size and light weight;
    5. Easy to install, no need to install straight pipe section before the meter.
    Technical parameter:
    Nominal diameter (mm) Instrument material Measuring range under different viscosity (m3/h) Pressure rating MPa
    0.62MPa.s 28MPa.s 8200MPa.s
    DN10 cast iron no 0.084 0.040.4 1.6 / 6.4
    DN15 cast iron/cast steel no 0.31.5 0.151.5 1.6 / 6.4
    Stainless steel 0.51.5 0.31.5 0.252.5 1.6
    DN20 cast iron/cast steel 0.753 0.43 0.33 1.6 / 6.4
    Stainless steel 13 0.63 0.53 1.6
    DN25 cast iron/cast steel 1.56 0.86 0.66 1.6 / 6.4
    Stainless steel 26 1.26 16 1.6
    DN40 cast iron/cast steel 315 215 1.115 1.6 / 6.4
    Stainless steel 2.520 220 1.520 1.6
    DN50 cast iron/cast steel 4.824 324 2.424 1.6 / 6.4
    Stainless steel 824 4.824 424 1.6
    DN65 cast iron/cast steel 840 540 440 1.6 / 6.4
    Stainless steel 1540 840 6.540 1.6
    DN80 cast iron/cast steel 1260 860 660 1.6 / 6.4
    DN100 cast iron/cast steel 20100 13100 10100 1.6 / 6.4
    DN150 cast iron/cast steel 38190 24190 19190 1.6 / 2.5
    DN200 cast iron/cast steel 68340 45340 34340 1.6 / 2.5
     
  • Introduction:
    The working principle of the oval gear flowmeter is that the liquid pushes a pair of oval gears to rotate; the volume of each cavity is a fixed volume; the speed of the gears is drawn out, and the sensor sends out synchronization
    Pulse counting, the rotation of the oval gear is transmitted to the counter through the magnetic seal coupling and the transmission reduction mechanism to directly indicate the total amount flowing through the flowmeter. If an additional letter is sent
    After installation, it can be equipped with an electric display instrument to realize remote transmission only instantaneous flow or cumulative flow.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com