Introduction: The electromagnetic water meter is a battery powered electromagnetic induction water meter. Battery powered electromagnetic water meters can be installed anywhere without sacrificing accuracy and performance, Without the need for mains power, it is specially designed for individual water applications such as water intake, network distribution, metering and irrigation, it has intelligent information and high measurement It is easy to install and save user investment, bringing users a brand-new meter experience. Electromagnetic water meters are widely used in some public utilities and building facilities in China. It has been widely used in steel, chemical industry, coal, metallurgy, papermaking, environmental protection, sugar refining, water conservancy irrigation, water conservancy, and port buildings in the country. The medium it can measure is relatively special, except for some basic raw water, cooling water, sewage, etc., for mud, coal slurry, acid, salt solution, fiber slurry,The volume and flow of lime milk, hydrogen peroxide, beer and various beverage solids, liquids, and fluids can be measured to achieve better control. Features: 1. The instrument is easy to install - the instrument can be buried underground or installed in a well. The design of IP68 (NEMA6P) is not affected by any installation position of the instrument in the pipeline, And no filter is required. 2. Low pressure loss - straight-through measuring tube ensures minimal pressure loss, even at the highest flow rates. It can reduce the pressure on the entire network system, which helps It is used to prevent the pumping station from being over-pressurized, resulting in pipeline rupture and leakage. 3.Zero Maintenance - With no moving parts design, and the battery life can be up to 6 years. 4. Two-way measurement - Two-way flow measurement can be achieved with only one meter. 5. Smart Meter - Leak detection, data logger function, and error self-checking are possible with only one meter. Technical parameter: Connection method: flange type (GB/T9119-2010) Measurement parameters: instantaneous flow, cumulative flow, pressure (optional) Diameter (mm): DN50-DN300 Pressure class (MPa): 1.0MPa to 4.0MPa (by caliber) Lining Material: Rubber Conductivity: ≥20us/cm Electrode: Stainless Steel 316L Protection class: IP68 Temperature: Medium temperature: 0℃~+70℃ Ambient temperature: -25℃~+70℃ Storage temperature: -40℃~+70℃ Housing Material: Stainless Steel converter Protection class: IP68 Measuring range: 0m/s to ±15m/s continuously measurable Measurement accuracy: 2 or 1, the implementation of the standard GB/T778-2007 Power supply mode: built-in 3.6V lithium battery
Introduction: The electromagnetic water meter is a battery powered electromagnetic induction water meter. Battery powered electromagnetic water meters can be installed anywhere without sacrificing accuracy and performance, Without the need for mains power, it is specially designed for individual water applications such as water intake, network distribution, metering and irrigation, it has intelligent information and high measurement It is easy to install and save user investment, bringing users a brand-new meter experience. Electromagnetic water meters are widely used in some public utilities and building facilities in China. It has been widely used in steel, chemical industry, coal, metallurgy, papermaking, environmental protection, sugar refining, water conservancy irrigation, water conservancy, and port buildings in the country. The medium it can measure is relatively special, except for some basic raw water, cooling water, sewage, etc., for mud, coal slurry, acid, salt solution, fiber slurry,The volume and flow of lime milk, hydrogen peroxide, beer and various beverage solids, liquids, and fluids can be measured to achieve better control.
