Brief introduction TP611 automatic closed cup flash point tester, using advanced 32-bit embedded microprocessor as the core of the main control, embedded Mini operating system. Is based on ASTM, D93 GB/T261 design, production of a new generation of fully automated equipment. With temperature automatic control, automatic open cover and ignition, automatic print output, automatic cooling and other functions. The instrument also has the function of fault diagnosis. Features Lifting, temperature control, ignition, detection, printing, cooling, etc. Heating rate, stirring rate can be adapted to a variety of standards There is atmospheric pressure correction function Temperature value automatically stop heating Fault self diagnosis Import 260000 color TFT true color liquid crystal display Technical parameter Measurement range: 40 to 370℃ Measurement accuracy: flash point value at <110 ℃± 1 ℃ Flash point value ≥110℃± 2 ℃ Differentiation rate of:0.1℃ Ambient temperature: 5℃ to 40℃ Relative humidity: less than 85% Power supply voltage: AC 220V 10% 50Hz 10% Power consumption: <500W Display mode: TFT liquid crystal display (480 x 272) Cooling mode: air cooling Ignition mode: the default is a gas source (no gas source, need special instructions) Printer: thermal type, 36 characters, Chinese characters output Dimensions: 350mm x 310mm x 300mm Instrument weight: 13.5kg
Brief introduction TP611 automatic closed cup flash point tester, using advanced 32-bit embedded microprocessor as the core of the main control, embedded Mini operating system. Is based on ASTM, D93 GB/T261 design, production of a new generation of fully automated equipment. With temperature automatic control, automatic open cover and ignition, automatic print output, automatic cooling and other functions. The instrument also has the function of fault diagnosis.
