Introduction: The working principle of the cryostat is to add a refrigeration device based on the conventional thermostatic bath. During operation, the refrigeration unit is always working to cool the bath. When the water temperature is higher than the set temperature, the heater does not work and the water temperature drops; when the water temperature reaches the set temperature, the heater works, balances the cooling, and stabilizes the water temperature. The cryostat is mostly consistent with the common thermostat, including the bath, heater, agitator, circulation pump, temperature sensing element, thermostat controller, etc. The cryostat removes the conventional thermostat configuration and increases the refrigeration unit. Common media for cryostats are: 0 degrees below normal temperature: alcohol; below 0 degrees ~ high temperature: special silicone oil (expensive) Features: 1. Air-cooled fully enclosed compressor unit, imported chiller, large cooling capacity; 2. The low temperature test can be carried out in the working tank or the cold liquid in the tank can be externally led to cool the experimental container outside the machine; 3. According to the principle of large space refrigeration, adopting a new and improved evaporator, the temperature is cooled more quickly and the temperature is more uniform; 4. Temperature and time adopt digital display; 5. The function keys are all touch soft keys; 6. Newly designed professional circuit, PID output, more precise temperature control; 7. The inner tank and the countertop are made of high quality stainless steel, which is clean and hygienic, beautiful and corrosion resistant; 8. Appointment start, delay shutdown; 9. Comes with over temperature and differential temperature alarm function. Technical Parameters Model / Specification: TF-HX-5A Temperature range: -10～99°C Capacity: 5L Power: 220V/50HZ Power 300W Accuracy: ±0.1 °C Operating size length (L) * width (W) * height (H): 185 * 140 * 110mm Mechanical size length (L) * width (W) * height (H): 430 * 285 * 575mm
Introduction: The working principle of the cryostat is to add a refrigeration device based on the conventional thermostatic bath. During operation, the refrigeration unit is always working to cool the bath. When the water temperature is higher than the set temperature, the heater does not work and the water temperature drops; when the water temperature reaches the set temperature, the heater works, balances the cooling, and stabilizes the water temperature. The cryostat is mostly consistent with the common thermostat, including the bath, heater, agitator, circulation pump, temperature sensing element, thermostat controller, etc. The cryostat removes the conventional thermostat configuration and increases the refrigeration unit. Common media for cryostats are: 0 degrees below normal temperature: alcohol; below 0 degrees ~ high temperature: special silicone oil (expensive)
