SZF-06A fat tester Introduction
The SZF-06A fat meter is based on the Soxhlet extraction principle and the weight measurement method is used to determine the fat content. That is, the fat is dissolved in an organic solvent, and the fat is separated from the solvent by extraction, and then dried, and the fat content is weighed and calculated. SZF-06A fat analyzer is reasonable in design, stable in performance, labor-saving and time-saving. The measurement results are in line with national standards, and all indexes and performances meet the requirements of imported similar products. SZF-06A fat analyzer is an ideal equipment for measuring fat in food, grease, feed and other industries.
SZF-06A fat analyzer mainly consists of three parts: heating extraction, solvent recovery and cooling. When the SZF-06A fat analyzer is operated, the heating temperature can be adjusted according to the boiling point of the reagent and the ambient temperature. The sample is repeatedly soaked and extracted during the extraction process to achieve rapid measurement. Technical Parameters
1. Measurement range: grain, feed, oil and various fat products with oil content in the range of 0.5%-60%.
2. Determination of samples: 6;
3, the extraction time is adjustable, when the alarm occurs;
4, the power supply voltage: 220V ± 10V frequency 50Hz;
5, electric heating power: 600W;
6, temperature control range: room temperature -100oC
7, dimensions: 550 × 320 × 626;
8, weight: 23kg.
Introduction
The SZF-06A fat meter is based on the Soxhlet extraction principle and the weight measurement method is used to determine the fat content. That is, the fat is dissolved in an organic solvent, and the fat is separated from the solvent by extraction, and then dried, and the fat content is weighed and calculated. SZF-06A fat analyzer is reasonable in design, stable in performance, labor-saving and time-saving. The measurement results are in line with national standards, and all indexes and performances meet the requirements of imported similar products. SZF-06A fat analyzer is an ideal equipment for measuring fat in food, grease, feed and other industries.
SZF-06A fat analyzer mainly consists of three parts: heating extraction, solvent recovery and cooling. When the SZF-06A fat analyzer is operated, the heating temperature can be adjusted according to the boiling point of the reagent and the ambient temperature. The sample is repeatedly soaked and extracted during the extraction process to achieve rapid measurement.
