Introduction: The car airbag test detonator can be used to detonate the airbag of a scrapped automobile and has a self-test process of the initiator, which can safely and reliably detonate the airbag. The detonator consists of a control box, a power connection, and an airbag connection. A power connection of about 2 meters is connected to the input port, and an airbag connection of about 10 meters is connected to the output port. Technical Parameters: 1, product use environmental conditions Ambient temperature: -0°C~40°C Relative humidity: 20%~85% Supply voltage: DC12V 2 Dimensions: 300 × 197 × 80 (length × width × height) mm Precautions: 1. When released, the assembly will be very hot, so it should be placed for at least 30 min; handle gloves and goggles when the airbag assembly has been opened; water should not be splashed on the airbag assembly; after the operation is completed Be sure to wash your hands. When the initiator is not in use, place each part in a separate place. Do not damage, modify, pull, bend, or twist the cable. Do not place heavy objects on the cable and the cable is located in a place where it is difficult to stomp. 2. Starter box, and its cables should not be placed in a damp place. Heavy objects should not be placed on the detonator box. 3. Do not use a multimeter to directly detect the airbag's lead! Airbag Test Detonator Notes: 1. When released, the assembly will be very hot, so it should be placed for at least 30 min; handle gloves and goggles when the airbag assembly has been opened; water should not be splashed on the airbag assembly; after the operation is completed Be sure to wash your hands. When the initiator is not in use, place each part in a separate place. Do not damage, modify, pull, bend, or twist the cable. Do not place heavy objects on the cable and the cable is located in a place where it is difficult to stomp. 2. Starter box, and its cables should not be placed in a damp place. Heavy objects should not be placed on the detonator box. 3. Do not use a multimeter to directly detect the airbag's lead!
Introduction: The car airbag test detonator can be used to detonate the airbag of a scrapped automobile and has a self-test process of the initiator, which can safely and reliably detonate the airbag. The detonator consists of a control box, a power connection, and an airbag connection. A power connection of about 2 meters is connected to the input port, and an airbag connection of about 10 meters is connected to the output port.
