Position: Home > > Industry specific instrument > Coal industry special instruments > Coal gauge > STS-750 series total station for Surveying Engineering

STS-750 series total station for Surveying Engineering

Product ID:HZMTpm003

Price: Please inquire PDF Format
Supply Ability:50SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberSTS-750 series
    Brand NameYIMA
    Payment TermsT/T, paypal
    STS-750 series total station
     
    Introduction:
    The STS-750 series total station is suitable for various measurement environments: high temperature, severe cold, and rain; it is capable of major measurement tasks: mapping, engineering, and construction. Excellent protection and environmental adaptability enable the instrument to work stably under various complex and harsh operating conditions, ensuring the reliability of measurement results at any time, and ensuring maximum use efficiency.
    feature of product:
    1. Absolute coding angle measurement
    No initialization is required to start up, which can avoid data loss caused by power-down shutdown during measurement. Improve the accuracy and stability of angle measurement.
    2. Biaxial liquid photoelectric electronic compensation
    Internationally advanced dual-axis compensation technology, horizontal and vertical compensation at the same time, automatically eliminate errors. Graphical electronic bubbles are clear at a glance.
    3. Laser distance measurement without prism
    Point emitting surface receiving, longer measuring range; fast speed: precise measurement 0.8 seconds, tracking 0.5 seconds; long measuring range: no prism measurement range up to 600m, reflector sheet 1000m, single prism up to 5000m; high accuracy: 2+2 ppm measurement Distance accuracy, 2" angle measurement accuracy.
    4. IP55 waterproof and dustproof design
    The battery adopts a built-in design, and the key parts such as the horizontal and vertical axis, the panel, and the telescope focusing are protected by waterproof rubber rings to ensure that it can adapt to various harsh environments.
    5. Laser pointing
    The laser beam can also be always on when the distance is not being measured, which is convenient for aiming at the target in low light environments such as tunnels.
    6. Laser alignment (optional)
    The visible laser beam is used to directly aim at the centering control point, eliminating the tedious operation of adjusting the eyepiece and improving work efficiency.
    7. Large memory
    The built-in memory of the instrument can store 26,000 points. The standard 2G SD card supports large-capacity storage. The SD card can be expanded to 32G.
    8. Convenient communication mode
    Three data communication modes: SD card, USB, and serial port transmission.
    9. Big screen, big buttons
    Large LCD screen, 8-line data display, convenient for data entry and viewing.
    10. The screw pitch is changed from 0.35MM to 0.25MM
    The fine-tuning amplitude is encrypted, and the telescope is aimed more accurately.
  • Introduction:
    The STS-750 series total station is suitable for various measurement environments: high temperature, severe cold, and rain; it is capable of major measurement tasks: mapping, engineering, and construction. Excellent protection and environmental adaptability enable the instrument to work stably under various complex and harsh operating conditions, ensuring the reliability of measurement results at any time, and ensuring maximum use efficiency.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com