STRONG-S-6020 monochromatic infrared thermometer Introduction: The STRONG series monochromatic thermometer is a high-performance and intelligent monochromatic infrared thermometer. It has a sturdy appearance and features a 304 stainless steel movement, which can be optionally equipped with 304 stainless steel protection with blowing and cooling functions. It uses manual adjustable focus lenses, achromatic combination lenses, high reliability circuit design (low-temperature drift, fully digital measurement design scheme, high integration SOC chip application, visual OLED operation interface) and software design (environmental temperature compensation, real-time signal processing, abnormal signal processing, and continuous optimization of various application environment software codes). These special designs enable the STRONG series monochromatic thermometers to meet the needs of various demanding industrial sites and precise temperature control. The STRONG series monochromatic thermometer determines the temperature of an object by receiving the total amount of narrow band radiation energy emitted by the object. It adopts advanced software and hardware design, with an ultra wide dynamic range and high stability. It can be widely used for temperature measurement in various industrial applications such as wire rods, hot-rolled plates, heat treatment, induction heating, forging, glass furnaces, vacuum furnaces, high-temperature furnaces, monocrystalline silicon, and polycrystalline silicon. Temperature measurement range covers 150 ℃ to 3000 ℃ Features: 1. The temperature measurement accuracy can reach 0.5%, the repeatability accuracy is 2 ℃, and the resolution is 0.1 ℃ 2. Response time adjustable from 5ms to 99.99s 3. Adopting a manually adjustable focus lens, the standard focal length is 0.45m to infinity, and the near focal length is 0.25m to 0.6m adjustable 4. 1:1 high brightness green LED light source or eyepiece aiming, clearly displaying the position and size of the tested target. 5. The detector adopts PID constant temperature control and comes with full range temperature compensation, avoiding the impact of environmental temperature on measurement accuracy. 6. Adopting an industrial grade long-life yellow OLED screen as the display interface, the human-machine interface is friendly 7. Rich peripheral interfaces: 2 independent analog outputs, 2 alarm outputs, 1 level output, and 1 RS485 communication interface. 8. The design of software and hardware watchdog, hardware EMI filtering, etc. improves system stability and can resist 2500VDC pulse group interference 9. Supports bus cascading of up to 26 thermometers, achieving networked control through PC Technical parameters: Model: STRONG-S-6020 Temperature measurement range (℃): 600-2000 Detector: Si (silicon photocell) Working wavelength: (0.85-1.1) μ M Main applications: hot rolling, metal forging, casting, induction heating, glass furnaces, monocrystalline silicon, polycrystalline silicon, vacuum furnaces Distance coefficient: 100:1 Measurement distance: Standard focal length: 0.45m to infinity adjustable, near focal length: 0.25m to 0.6m Measurement accuracy: ± 0.5% T (T is the reading temperature), higher precision can be customized Temperature resolution: 0.1 ℃ Repetitive accuracy: ± 2 ℃ Monochromatic coefficient: 0.100~1.100, adjustable step size of 0.001 Response time: 5ms~99.99s adjustable, faster speed customizable Signal processing: peak, valley, average, alarm for high or low ambient temperature, power failure protection, and other functions Output: The first group of multiple analog outputs (4mA~20mA, 0mA~20mA, 0V~5V, 0V~10V can be switched), Output resolution of 16 bits, accurate to 0.1 ℃, maximum load of 600 Ω for current loop output, allowable current of 10mA for voltage output The second set of analog output is 4mA~20mA, with a resolution of 16bit and an accuracy of 0.1 ℃. The maximum load output of the current loop is 600 Ω Alarm output: Upper and lower limit alarms, using optocoupler relays with unlimited service life, Conduction resistance ≤ 2 Ω, maximum allowable voltage AC42V or DC60V, maximum allowable current 120mA, response time 2ms PNP level output (output current 100mA, with overload protection) RS485 output, capable of parameter modification, data recording, and querying functions Display method: Adopting self luminous industrial grade OLED display screen Power supply: DC (20-30) V, power consumption: 5W（ 24V@200mA ）Equipped with overvoltage, overcurrent, and short circuit protection, Built in EMI filter, able to resist interference from 2500VDC pulse group. Environmental temperature compensation: Equipped with a 40 ℃ constant temperature heater and full temperature compensation, the temperature measurement accuracy is almost unaffected by the ambient temperature. Aiming method: You can choose to aim with a visible high brightness green light or with an eyepiece. The eyepiece aims directly at the target object, and what you see is what you measure. Interface: 12 core high-temperature shielded cable and international brand fully sealed plug Usage environment: -20 ℃~+60 ℃, without water cooling- 20 ℃~+200 ℃, with water cooling Protection level: IP65
Introduction: The STRONG series monochromatic thermometer is a high-performance and intelligent monochromatic infrared thermometer. It has a sturdy appearance and features a 304 stainless steel movement, which can be optionally equipped with 304 stainless steel protection with blowing and cooling functions. It uses manual adjustable focus lenses, achromatic combination lenses, high reliability circuit design (low-temperature drift, fully digital measurement design scheme, high integration SOC chip application, visual OLED operation interface) and software design (environmental temperature compensation, real-time signal processing, abnormal signal processing, and continuous optimization of various application environment software codes). These special designs enable the STRONG series monochromatic thermometers to meet the needs of various demanding industrial sites and precise temperature control. The STRONG series monochromatic thermometer determines the temperature of an object by receiving the total amount of narrow band radiation energy emitted by the object. It adopts advanced software and hardware design, with an ultra wide dynamic range and high stability. It can be widely used for temperature measurement in various industrial applications such as wire rods, hot-rolled plates, heat treatment, induction heating, forging, glass furnaces, vacuum furnaces, high-temperature furnaces, monocrystalline silicon, and polycrystalline silicon. Temperature measurement range covers 150 ℃ to 3000 ℃
