STA200 synchronization Thermal analyzer for Materials Research Brief introduction: Simultaneous thermal analysis will be DTA TG thermogravimetric analysis and differential thermal analysis and differential scanning calorimetry (DSC combined into an organic whole, at the same time measurement using the same sample synchronization by TG and DTA and DSC. Features: DSC: melting, crystallization, phase change, reaction temperature and reaction heat, heat of combustion, heat... TG: thermal stability, decomposition, REDOX, adsorption, desorption, free water and crystal water content, composition ratio calculation, etc Technical parameters: 1. Temperature Scope: at room temperature to 1150 ℃ can be extended to ~ 1350 ℃ 2. Temperature resolution: 0.1 ℃ 3. Temperature fluctuation: plus or minus 0.1 ℃ 4. The heating rate: 1 ~ 80 ℃ / min 5. Temperature control mode: temperature, constant temperature, cooling 6. The constant temperature time: 0 ~ 300 min set arbitrary 7. The cooling time: 15 min (1000 ℃ ~ 100 ℃) 8 scales measuring range: 1 ~ 2 mg g can be extended to 5 g 9. The DSC range: 0 ~ + 500 mw 10. The DSC resolution: 1 mu W 11. Resolution: 0.1 mu g 12. The constant temperature time: 0 ~ 300 min set arbitrary 13. The display mode: 24 bit color 7 inch LCD touch screen display 14. The atmosphere: inert, oxidizing, reducing and static and dynamic 15. Atmosphere device: built-in gas flowmeter, contains two gas switch and flow control 16. Software: intelligent software can automatically record the TG curve for data processing, print test reports 17. Data interface: standard USB interface 18. Power supply: AC220V 50 hz
Brief introduction: Simultaneous thermal analysis will be DTA TG thermogravimetric analysis and differential thermal analysis and differential scanning calorimetry (DSC combined into an organic whole, at the same time measurement using the same sample synchronization by TG and DTA and DSC.
