Introduction: The instrument meets the requirements of the GB3682-2000 standard (MFR; volume method MVR), the main parameters are to meet the requirements of ISO1133-97 standard can be used for polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber Determination of melt flow rate of various materials such as resins, acrylates, polyoxymethylene, fluoroplastics, polycarbonates. Features: 1, The instrument in the original technology, based on the touch screen control, innovative, easy to operate. 2, replaced the original LCD screen, using a large size of the color screen, the visual effect is better, the same screen display more information. Operation with voice prompts. 3, improve the calculation of test results, retain the decimal, the results rounded off, making the calculation more accurate. 4, any step in the test can be manually skipped, easy to test. 5, with Japan Toho temperature control, high precision control. 6, Automatically cut material when the motor cycle positioning through the photoelectric closed loop, the cycle of cutting material more accurate position, the quality of each sample is almost the same. R & D formula for the product to provide more realistic and accurate data. Technical Parameters: 1, standard parts parameters: (1) barrel parameters: bore: Φ9.550mm ± 0.025mm (2) Piston parameters: piston head Φ9.475mm ± 0.015mm (3) Piston head length: H = 6.35mm ± 0.1mm (4) Diaphragm diameter: Φ2.095mm ± 0.005mm (5) Omentum length (runner length): Φ8.00mm ± 0.025mm 2, temperature control parameters: (1) Temperature range: 80 ~ 400 ℃; (2) Temperature control accuracy: ± 0.2 ℃ (3) Display resolution: 0.1 ℃; (4) Maximum power consumption: ≤ 0.5KW; (5) Temperature recovery time: 4min 3, position detection: (1) up and down position loop distance: 30mm (2) control accuracy: ± 0.1mm 4, equipment weight: 50kg 5, Dimensions: 460mm × 280mm × 415mm (length × width × height) 6, Power: AC220V 0.5KW 7, the index range: Quality Law: 0.1--100g / min; Volume method: 0.1 - 400g / min
Introduction: The instrument meets the requirements of the GB3682-2000 standard (MFR; volume method MVR), the main parameters are to meet the requirements of ISO1133-97 standard can be used for polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber Determination of melt flow rate of various materials such as resins, acrylates, polyoxymethylene, fluoroplastics, polycarbonates.
