Brief introduction: SMT-4001 no rotor curing is a new generation of mechatronic products. The factory launched mainly by the host, OMRON high precision temperature controller, sensor, computer, lower computer data acquisition, printers and electrical chain components. The implementation of standards: ASTMD5289 95 ISO6502: 1991 GB/T165841996 provide vulcanizing vulcanization curve, velocity curve and temperature curve can be a single curve. In the test on the same interface, can be arbitrary curves of arbitrary curve continuous test and comparison test, the data is stored in the database, real-time or historical print all curve data. Technical indicators: Temperature range: 0 - 200 DEG C Temperature measurement accuracy: less than 0.1 DEG C Temperature resolution: 0.1 degrees Torque range: (0-5N.m, 010N.m 020N.m) automatically Torque resolution: 0.001N.m The cavity frequency: 1.7Hz Amplitude: + 0.5 degrees 1 degrees. Power: AC 220V + 10%50Hz Compressed air: 0.5Mpa ambient temperature: 035 C The relative humidity of <80% The curing time setting range: 2300min, T90 in 10 seconds to 5 hours.
Brief introduction: SMT-4001 no rotor curing is a new generation of mechatronic products. The factory launched mainly by the host, OMRON high precision temperature controller, sensor, computer, lower computer data acquisition, printers and electrical chain components. The implementation of standards: ASTMD5289 95 ISO6502: 1991 GB/T165841996 provide vulcanizing vulcanization curve, velocity curve and temperature curve can be a single curve. In the test on the same interface, can be arbitrary curves of arbitrary curve continuous test and comparison test, the data is stored in the database, real-time or historical print all curve data.
