SDFCl3000 automatic fluorine and chlorine analyzer Introduction: The SDFCl3000 automatic fluorine and chlorine analyzer is fully automated in sample injection, analysis, and result calculation, truly achieving unattended operation throughout the entire testing process. The electrode parameters are automatically calibrated. The main application scope of the element analyzer includes measuring the content of fluorine, chlorine, and other elements in samples from the fields of electricity, coal, metallurgy, petrochemicals, coalification, environmental protection, cement, paper making, geological exploration, research institutes, solid/hazardous waste, and more. Complies with standards: GB/T4633-2014 "Method for Determining Fluorine in Coal", GB/T3558-2014 "Method for Determining Chlorine in Coal", and GB/T30729-2014 "Method for Determining Chlorine in Solid Biomass Fuels". Features: 1. High degree of automation. The entire testing process, including sample injection, analysis, and result calculation, is fully automated, truly achieving unattended operation; electrode parameters are automatically calibrated. 2. A single sample can yield results for both fluoride and chloride simultaneously. 3. Equipped with a condensation system, there is no need to be close to a water source, effectively saving water consumption. 4. Multiple techniques are employed to mitigate experimental errors and ensure precise testing. 4.1 Collect precise liquid sampling techniques to eliminate the impact of dead volume in the flow path on test results; 4.2 Liquid collection condensation temperature control technology ensures uniform temperature of the collected liquid, reducing the impact of solution temperature differences on absorption and analysis results. Technical Specifications: Test range: Fluorine 50ppm~5000ppm; Chlorine 50ppm~5000ppm Sample decomposition and collection: approximately 30 minutes (including water circuit cleaning) Sample mass: reference sample weight 0.5g (determined based on the sample and indicator) Operating furnace temperature: 1100℃ Temperature control accuracy: ±5℃ Testing duration: including sample decomposition, collection, test solution analysis, and water circuit cleaning Test solution testing time: about 5 minutes for fluoride; about 5 minutes for chlorine Maximum power: 4kW Power supply voltage: AC220V±10%, 50Hz±1Hz
SDFCl3000 automatic fluorine and chlorine analyzer Introduction: The SDFCl3000 automatic fluorine and chlorine analyzer is fully automated in sample injection, analysis, and result calculation, truly achieving unattended operation throughout the entire testing process. The electrode parameters are automatically calibrated. The main application scope of the element analyzer includes measuring the content of fluorine, chlorine, and other elements in samples from the fields of electricity, coal, metallurgy, petrochemicals, coalification, environmental protection, cement, paper making, geological exploration, research institutes, solid/hazardous waste, and more. Complies with standards: GB/T4633-2014 "Method for Determining Fluorine in Coal", GB/T3558-2014 "Method for Determining Chlorine in Coal", and GB/T30729-2014 "Method for Determining Chlorine in Solid Biomass Fuels".
