RNA-3000 Air Generator (Clean Dry Air Generator for Laboratory Use) Product Introduction The RNA-3000 Air Generator is a laboratory-grade clean and dry air supply system designed by our gas source division to provide high-purity compressed air for analytical instruments and laboratory environments. Using a cold-drying and multi-stage purification system, the RNA series ensures stable, oil-free, and moisture-free air output. It is widely used in laboratories requiring continuous clean compressed air, and supports customized configurations to meet specific application needs. Key Features • Dual-stage purification filtration system ensures clean and dry air output • Built-in oil-free, low-noise air compressor for quiet laboratory operation • Stainless steel air storage tank with electro-polished and passivated pipeline system • Ultrasonic cleaning process improves internal cleanliness and system reliability • Low-pressure solenoid valve enables continuous 24/7 operation • Stable output suitable for unattended laboratory environments • Customizable design available for different laboratory requirements • High reliability for long-term continuous operation Working Principle The RNA-3000 Air Generator operates through a compression–filtration–drying–stabilization process: • Air is compressed by an oil-free low-noise compressor • The compressed air passes through a dual-stage purification system • Moisture and impurities are removed during cold drying and filtration • Clean air is stored in a stainless steel buffer tank • A pressure stabilization system ensures continuous, stable output flow This ensures consistent clean dry air supply for laboratory instruments. Technical Specifications
Parameter
Specification
Output Flow Rate
0–3000 mL/min
Output Pressure
0–0.4 MPa
Pressure Stability
< 0.2%
Noise Level
< 35 dB(A)
Power Supply
220V ±10%, 50–60 Hz
Operating Temperature
0–40°C
Ambient Humidity
< 85% RH
Application Areas The RNA-3000 Air Generator is widely used in: • Analytical chemistry laboratories • Gas chromatography (GC) systems • Mass spectrometry support systems • Environmental monitoring laboratories • Pharmaceutical and biotech research labs • Food safety testing laboratories • University and research institute labs • Continuous unattended laboratory gas supply systems Product Comparison Compared with traditional air compressors, the RNA-3000 Air Generator offers significant advantages: • Unlike oil-lubricated compressors, it provides oil-free air output, preventing contamination of analytical instruments • Compared to standard compressors, it delivers lower noise (<35 dB) for a quieter lab environment • Traditional systems lack advanced purification, while RNA-3000 uses dual-stage filtration for higher purity air • Standard compressors require frequent maintenance, whereas RNA-3000 is designed for long-term continuous operation with minimal maintenance Overall, the RNA-3000 is optimized for precision laboratory applications requiring stable and clean air supply. FAQ Q1: Is the RNA-3000 suitable for gas chromatography systems? Yes. It provides stable, oil-free, and dry air ideal for GC and other analytical instruments. Q2: Does it require external air purification equipment? No. The built-in dual purification system already ensures clean and dry output air. Q3: Can it run continuously for long periods? Yes. It is designed for 24/7 continuous operation with low-pressure solenoid control. Q4: How noisy is the system? The operating noise is below 35 dB(A), suitable for quiet laboratory environments. Q5: Can the system be customized? Yes. Customized configurations are available based on laboratory requirements.
FAQ Q1: Is the RNA-3000 suitable for gas chromatography systems? Yes. It provides stable, oil-free, and dry air ideal for GC and other analytical instruments. Q2: Does it require external air purification equipment? No. The built-in dual purification system already ensures clean and dry output air. Q3: Can it run continuously for long periods? Yes. It is designed for 24/7 continuous operation with low-pressure solenoid control. Q4: How noisy is the system? The operating noise is below 35 dB(A), suitable for quiet laboratory environments. Q5: Can the system be customized? Yes. Customized configurations are available based on laboratory requirements.