RBM-II metal grinding prototype Introduction: The RBM-II metal grinding prototype is a sample preparation equipment carefully developed by our company for metal samples. This metal grinding prototype has a wide range of applications and can be equipped with various accessories, suitable for the needs of different customers. The application fields involve pre-treatment of steel analysis, medical device analysis, aluminum analysis, etc. Its prominent feature is to grind the end faces of metal material samples with different regular shapes, so that the quality of the end faces of the samples meets the analysis requirements of direct reading spectrometers and X-ray fluorescence spectrometers. characteristic: 1. High grinding efficiency: The high-power motor (2.2KW * 2) has higher grinding efficiency, and the sample processing time does not exceed 20 seconds. Even if the load is high, it still works reliably, eliminating faults such as burning caused by overload of the motor, and protecting the user's operational safety. 2. Dual motor: grinding wheel（ φ 350). Sandpaper（ φ 350) Dual disc and dual motor operate independently. Greatly improving work efficiency and equipment usage, while also eliminating the problem of production stoppage due to accidental motor damage. Replacing sandpaper is very convenient and economical, suitable for both the processing and production of black metal and other metal material samples, to prevent cross contamination of the samples. 3. Environmental protection: Compared with ordinary bag type dust removal systems, RBM-II has an innovative and enhanced built-in dust removal system - a dust hopper, a dust net, and a dust collection wall with three layers of protection to prevent dust from overflowing, eliminate the harm of dust generated during the grinding process to human health, ensure laboratory cleanliness, and facilitate equipment cleaning. 4. Humanization: A tray is specially installed on the right side, making it convenient for users to place samples and small tools. The design of grinding bell mouth effectively reduces dust leakage. The circular edge design of the grinding port prevents hand injury. Technical parameters: Grinding disc size: Φ 350 mm External dimensions: length 950 x width 1100 x height 1100 mm Input power supply: 3x380V AC Input power: 5KW Motor power: 2.2KW x 2 Small sample fixture: not opti
Introduction: The RBM-II metal grinding prototype is a sample preparation equipment carefully developed by our company for metal samples. This metal grinding prototype has a wide range of applications and can be equipped with various accessories, suitable for the needs of different customers. The application fields involve pre-treatment of steel analysis, medical device analysis, aluminum analysis, etc. Its prominent feature is to grind the end faces of metal material samples with different regular shapes, so that the quality of the end faces of the samples meets the analysis requirements of direct reading spectrometers and X-ray fluorescence spectrometers.
