Introduction: Tailored drying prototype machine test cloth size 300 × 400 (effective size 250 × 350), suitable for dyeing and finishing laboratory for drying, setting, resin processing baking, pad dyeing and thermosetting and other small sample stereotypes of the test. Technical Parameters: 1. Suitable for dyeing and finishing laboratories for drying, stereotypes, resin processing baking, dyeing and baking and heat-fixing and other aspects of the test. 2. Made of high quality stainless steel SUS304 sheet. 3. Test cloth size: 300 × 400 (effective size 250 × 350). 4. Hot air circulation control, adjustable upper and lower air volume: A. Digital temperature automatic control system control temperature accuracy of ± 2% B. Working temperature 20 ℃ -250 ℃ C. Electric heating power: 6KW. 5. Insulation control: from 10 seconds - 6 minutes can be preset, the end automatically exit and end ringing. 6. Fan: stainless steel wind wheel, fan motor power 180W. 7. Needle board: Bi-directional pin board cloth two groups. 8. Power: three-phase 380V, 50HZ. 9. Dimensions: Vertical 800 mm (side) × 760 mm (front) × 1030 mm (high) Horizontal 1320㎜ (Side) × 660㎜ (Front) × 800㎜ (High) 10. The weight is about 120㎏
Introduction: Tailored drying prototype machine test cloth size 300 × 400 (effective size 250 × 350), suitable for dyeing and finishing laboratory for drying, setting, resin processing baking, pad dyeing and thermosetting and other small sample stereotypes of the test.
