Introduction: The computer-controlled electro-hydraulic servo fatigue testing machine is mainly used for the fatigue test of various materials, components, and components, and can test the tension and compression fatigue under dynamic loads such as sine wave, triangle wave, trapezoidal wave, rectangular wave and ramp wave. The computer-controlled electro-hydraulic servo fatigue testing machine equipped with all-digital electro-hydraulic servo fatigue test control system, intelligent self-diagnostic system, can be measured on a regular basis, servo drive system circuit self-test, fully guarantee the test machine in any environment, state Under the long-term stability, non-interference, safe and reliable operation, to achieve unmanned monitoring test, is machinery manufacturing, aerospace, construction. Technical Parameters: Model: MEP-10/20 Maximum dynamic load (kN): ± 10 / ± 20 Load measurement range: 2% of the maximum test force to 100% Static load measurement accuracy: ± 1% Piston maximum stroke: ± 50mm Frequency range: 0.001-40Hz Test waveform: sine wave, triangle wave, square wave Standard frame form: double column, under the actuator Test space (H × W) (mm): 450 × 350 Host Dimensions (L × W × H) (mm): 800 × 500 × 1800 Host weight (kg): 800 Hydraulic source: Basic configuration: 10 L / min Extended configuration: 30 L / min, 63 L / min, 160 L / min, 200 L / min optional Power supply voltage: conventional voltage 220V and 380V, but also according to the country to use the standard voltage configuration
