Product introduction: MARS monochrome thermometer series has a sturdy appearance, adopts stainless steel movement (the diameter of the core is only 50mm), adopts high-temperature rubber for sealing parts, and the protection grade is IP65, suitable for industrial applications. The design of software and hardware is applicable to the processing of a million times of signals, which can meet the user's requirements on the precision, repeatability and other aspects of the instrument. It can be widely used in heat treatment, casting, cement kiln, induction heating, monocrystalline silicon and polycrystalline silicon, etc. Product features: Covering 100 ℃ ~ 2000 ℃ temperature range Temperature measuring accuracy can reach 0.5%, repeat accuracy of 2 ℃, 0.1 ℃ temperature resolution Response time is adjustable 5ms ~ 99.99s Use adjustable lens to measure distance from 0.35m to infinity Aim high brightness green LED light source or eyepiece, clearly show the position and size of the target The detector is compensated with ambient temperature to eliminate the influence of ambient temperature on the measured temperature Industrial OLED screen is used as display interface, man-machine interface friendly Rich peripheral interface: programmable analog output, alarm output, RS485 output Software and hardware guard dogs, hardware EMI filter design to improve the system stability It can resist the interference of 2500VDC pulse group Up to 26 thermometers can be cascaded and networked via PC Technical parameters: Model: MARS - S - 6020 Temperature range (℃) : 600 ~ 2000 Detector: Si(silicon photocell) Working wavelength :(0.85 ~ 1.1 Main applications: hot rolling, metal forging, casting, induction heating, glass, cement kiln, semiconductor Distance coefficient: 100 :1 or 200:1 Measuring distance: 0.35m to infinity adjustable Accuracy of measurement: plus or minus 0.5% tm ℃ for the upper limit temperature measurement range (tm) The temperature resolution: 0.1 ℃ Repeatability: plus or minus 2 ℃ Monochrome coefficient: 0.100 ~ 1.000, adjustable step distance: 0.001 Response time: 5ms ~ 99.99s, adjustable Signal processing: peak value, valley value, average value, environmental temperature too high too low alarm, power loss protection and other functions Output: multiple analog output of 16bit (4mA ~ 20mA, 0mA ~ 20mA, 0V ~ 5V, 0V ~ 10V optional), resolution Rate of 0.1 ℃, the current loop output maximum load 600 Ω, allow current of 10 ma, voltage output Alarm output: upper limit and lower limit alarm, use light coupling relay with unlimited life, conduction resistance Ω 1 or less, the maximum allowable Voltage AC42V or DC60V, maximum allowable current 100mA, response time 2ms RS485 output can realize parameter modification, data recording and query functions Display mode: adopt automatic light industrial OLED display Power supply: DC (20 ~ 30) V, power consumption: 2.5W (24V @100ma), with overvoltage, overcurrent and short circuit protection, built in EMI filter, can resist the interference of 2500VDC pulse group. Preheating time: the temperature can be measured after 10 minutes of power supply with the built-in thermostatic heater Aiming mode: built-in visible high-brightness green light or eyepiece aiming Interface: adopt all sealing plug Using the environment: - 30 ℃ ~ + 55 ℃, with no water;- 30 ℃ ~ + 120 ℃, water-cooled Protection grade: IP65
Product introduction: MARS monochrome thermometer series has a sturdy appearance, adopts stainless steel movement (the diameter of the core is only 50mm), adopts high-temperature rubber for sealing parts, and the protection grade is IP65, suitable for industrial applications. The design of software and hardware is applicable to the processing of a million times of signals, which can meet the user's requirements on the precision, repeatability and other aspects of the instrument. It can be widely used in heat treatment, casting, cement kiln, induction heating, monocrystalline silicon and polycrystalline silicon, etc.
