LHT04-10S Lighter Weighing Leak Detection System Introduction
Weighing leak detection system is a professional used to determine whether a lighter has a leak after a drop test, high temperature test, repeated gas injection test, fuel compatibility test, fuel volume displacement test (to be upgraded and added), instrument. The instrument is suitable for various types of lighters and ignition guns with a maximum external dimension of less than 350mm × 50mm × 50mm.
The instrument has two detection modes: "balance mode" and "continuous mode" and two adjustment modes "leveling mode" and "calibration mode". In the balance mode, the instrument can be used as a balance to accurately measure the measured object. It can also set a timing time to detect whether the lighter's leakage within the timing time meets the detection standard. In continuous mode, a single channel can measure 6 in two minutes. The lighter performs continuous testing in a pipelined manner to obtain the leakage amount of each lighter within 1 minute, and determine whether the lighter leakage meets the detection standard.
The instrument uses a high-precision balance module to weigh the weight of the lighter to ensure high accuracy of the test results. It uses advanced dual vibration isolation technology and uses a level sensor to monitor the level of the test platform in real time to reduce environmental interference and ensure the quality of the test environment. High stability; adopting high-stable transmission mechanism and pipeline detection method to realize the efficient transmission of the lighter, accurate weighing and accurate timing of leakage time, etc., to determine whether the lighter leak meets the detection standard, and finally automatically generated The report stores test data.
Technical Parameters
Detection efficiency: 6 pieces / 2 minutes
Detection accuracy: 0.1mg
Detection range: 90g
Timing accuracy: 0.01s
Timing range: 0 ～ 24h
Maximum compatible lighter size: 350mm × 50mm × 50mm;
Overall dimensions (L × W × H): 1m × 0.6m × 1.25m
Equipment power supply: 220VAC / 50Hz
Rated power during standby: 30W
Rated power during experiment: 200W
The LHT04-10S lighter weighing leak detection system uses a high-precision balance module to weigh the weight of the lighter to ensure high accuracy of the test results. The LHT04-10S lighter weighing leak detection system is used to determine whether the lighter is tested after a drop test, high temperature test, repeated gas injection test, fuel compatibility test, fuel volume displacement test (to be upgraded and added), etc. Leaked professional instruments.
