LH-CO1 Portable residual chlorine detector

Product ID:HSWJyl001

Price: Please inquire PDF Format
Supply Ability:20
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberLH-CO1
    Brand NameYM
    Payment TermsT/T western union paypal
    Introduction
    The instrument can provide the same measurement results as the national standard method for the use of the personnel, and the simple operation interface without professional on-site operation can get accurate results through the color meter.
    Using the instrument only on the boot, zero, reading, you can quickly complete the analysis and testing of the sample, small size, easy to carry, quality comparable to imported similar products.
    Widely used in urban water supply, food and beverage, environment, medical, chemical, pharmaceutical, thermoelectric, paper, aquaculture, bio engineering, fermentation process, textile printing, petrochemical, water treatment and other fields of rapid detection of water quality.
     Features
    Simple operation interface, no need for professional personnel on-site operation can get accurate results through the color meter.
    Quick analysis speed - up - to - zero - > reading, three minutes to complete a sample test.
    Accurate measurement results - the measurement results are consistent with the national standard method at anytime and anywhere.
    Economic test cost - quality comparable to imported similar products, but the cost is only about 1/3 of imported products.
    Lightweight design - small size, light weight, easy to carry.
     Technical parameter
    Determination range: 0 ~ 3.00mg/L
    Light source: silicon light diode
    Wavelength: 510nm
    Accuracy: ±0.05mg/L (measured value < 1 mg/L)
    ±0.10mg/L (measured value > 1 mg/L)
    Methods: using the standard DPD method, the amount of residual chlorine or chlorine and DPD reagent, the sample solution was red.
    Environment: temperature 0 ~ 40, relative humidity 0~90% (no condensation)
    Batterylife: 1 x 9V, 40 hours or more.
    Power off: after the color meter, press "ON/OFF" to shut down.
    Dimensions: 170 x 70 x 30mm
    Weight: 200g (including battery)

     
     
  • Introduction
    The instrument can provide the same measurement results as the national standard method for the use of the personnel, and the simple operation interface without professional on-site operation can get accurate results through the color meter.
    Using the instrument only on the boot, zero, reading, you can quickly complete the analysis and testing of the sample, small size, easy to carry, quality comparable to imported similar products.
    Widely used in urban water supply, food and beverage, environment, medical, chemical, pharmaceutical, thermoelectric, paper, aquaculture, bio engineering, fermentation process, textile printing, petrochemical, water treatment and other fields of rapid detection of water quality.

     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com