Introduction: Small freeze-drying machines are widely used in medical, pharmaceutical, biological research, chemical and food fields. The freeze-dried articles are easy to store for a long period of time, and can be restored to the pre-freeze state before adding water and maintain the original biochemical characteristics. LGJ-10FD (electric heating) freeze dryer to change the past the drying process of cumbersome operation, to prevent the pollution of the material to achieve the automation of sublimation drying. The model has a shelf heating and programmable function, you can remember the freeze-drying curve, comes with u disk extraction function, user-friendly material to observe the freeze-drying process. Features: 1 operating system has two kinds of manual operation and automatic operation mode, improve the selectivity of the freeze-drying process. 2 dry room door with colorless transparent plexiglass door, can clearly observe the whole process of freeze-dried sample. 3 unique vacuum airway design, cold trap to capture moisture evenly, to capture water capacity. 4 with automatic alarm and protection functions, equipment failure easy to judge. 5 with password protection, to ensure the safe and reliable operation of the equipment. 6 vacuum pump and host interface using the international common KF interface, with a variety of brand vacuum pump. 7 configuration inflatable valve, can be filled with dry inert gas. Technical Parameters: Freeze dry area: 0.2㎡ Cold trap temperature: ≤-56 ℃ (no load), optional <-80 ℃ (no load) Vacuum degree: ≤ 10Pa Water catching capacity: 3-5Kg / 24h Material tray: 400 * 270mm total of 2 layers Installed power: 2000W Host weight: about 260Kg Dimensions (mm): about 750 × 800 × 1390 Can be loaded material: 2L (material thickness 10mm)
