Introduction: LG-100D-type digital combination of soil liquid plastic limit tester, liquid plastic limit tester price, liquid plastic limit tester used to determine the soil liquid limit and plastic limit, for the division of soil, calculate the natural consistency, plasticity index Provide reliable data. The use of digital display technology, automatic timing, measurement, display, with stable performance, reliable data, high accuracy, intuitive readings, clear, easy to operate, high efficiency and so on. Specifications: 1, cone total weight: 76g ± 0.2g and 100g ± 0.2g 2, cone angle: 30 ° ± 0.2 ° 3, measuring depth of penetration: 0 ~ 22mm 4, reading accuracy: 0.1mm, estimated reading 0.05mm 5, measurement time: 5 seconds 6, Electromagnetic suction:> 100g 7, Power: 220V ± 10% Operating procedures 1, the instrument is placed on a horizontal workbench, adjust the level of the screw feet, the blisters together. 2, the instrument's power plug inserted, turn on the power switch, preheat 3 minutes. Gently lift the cone to the limit by hand before the measurement. At this time, the number on the display is a random number, and the measurement will be automatically eliminated. 3, the good soil samples into the test cup. Scrape the surface and place it on the instrument's elevator. Then slowly adjust the lifting knob clockwise, when the soil in the test cup just contact the cone tip, the contact indicator light immediately, this should stop rotating, and then press the "measurement" button. 4, press the "measurement" button, the cone falls, this time, the time sound beep! Beep ... ... the sound. When the measurement time arrives, the sound stops, at this time the display shows a depth of 5 seconds into the soil depth, the second measurement, the cone must be up again to the limit at the counterclockwise adjustment lift knob To be able to change the cone tip and the soil contact position (conical tip cone into the position two times the distance of not less than 1cm) wipe clean the cone tip, measure again, repeat the above steps. 5, the instrument factory, has prepared 100 grams and 76 cone. (A cone, two cone tip, a counterweight) counterweight and cone tip screwed together for 100 grams cone weight, if you need to use 76 grams cone, simply unscrew the original cone, take Under the cone on the weight of 76 grams of cone (cone top of the disk that is with weights), the tip can be used to screw on, and the instrument matching test cups, cone tip weight accessories are placed Other small boxes inside the instrument, take out the test cup or cone tips, pay attention to protect the cone tip, so as to avoid damage.
Introduction: LG-100D-type digital combination of soil liquid plastic limit tester, liquid plastic limit tester price, liquid plastic limit tester used to determine the soil liquid limit and plastic limit, for the division of soil, calculate the natural consistency, plasticity index Provide reliable data. The use of digital display technology, automatic timing, measurement, display, with stable performance, reliable data, high accuracy, intuitive readings, clear, easy to operate, high efficiency and so on.
