| Parameter | Specification |
| Measurement Methods | UV Fluorescence (S), Chemiluminescence (N), Microcoulometry (Cl) |
| Sample Types | Gas (LNG/LPG), liquid, solid (including heavy oil) |
| Detection Range | Gas: 0.2–20000 mg/m³; Liquid: 0.05–20000 mg/L; Solid: 0.5–20000 mg/kg |
| Detection Limit | 0.03 mg/L |
| Injection Volume | Gas: 1–20 mL; Liquid: 2–50 μL; Solid: 1–20 mg |
| Furnace Temperature | Room temp – 1100°C |
| Temperature Accuracy | 0.5% ± 5°C |
| Power Supply | AC 220V ±22V, 50Hz ±0.5Hz |
| Power Consumption | 1500 W |
| Range | RSD | Error |
| Liquid 0.2–1.0 mg/L | ≤10% | ±0.08 mg/L |
| Liquid 1–100 mg/L | ≤5% | ±10% |
| Liquid 100–20000 mg/L | ≤3% | ±6% |
| Gas 0.2–1.0 mg/m³ | ≤10% | ±0.08 mg/m³ |
| Gas 1–100 mg/m³ | ≤5% | ±10% |
| Gas 100–20000 mg/m³ | ≤3% | ±6% |
| Parameter | Specification |
| Combustion Furnace | Dual-zone 950°C / 1050°C gradient system |
| Furnace Design | Horizontal/vertical switchable |
| Combustion Tube | Quartz tube with enhanced surface area packing |
| Dryer System | Imported membrane dryer (<40 cm) |
| UV Detector | Hamamatsu xenon UV source |
| Nitrogen Detector | Chemiluminescence with interference suppression |
| Chlorine Detector | Microcoulometric cell |
| Autosampler Types | Liquid (120-position), solid (20–100 position), gas (2–8 channel) |
| Gas Requirement | High purity O₂ (99.99%), Ar (99.995%) |
| Feature | JF-TSNCL-6000ZX Multi-Element Analyzer | Conventional Single-Element Systems |
| Elements Measured | S + N + Cl integrated | Single element per instrument |
| Detection Methods | UVF + CL + Microcoulometry | Limited single method |
| Sample Types | Gas, liquid, solid | Usually single type |
| Automation Level | Fully automated autosampler system | Semi-automatic/manual |
| Analysis Time | 1–4 minutes/sample | Longer, multi-step |
| Interference Control | High-level suppression systems | Limited |
| Linear Range | Very wide, single calibration curve | Narrow, multiple calibrations required |
| Stability | High with imported components | Moderate |
