IVS800 Fully Automatic Viscosity Measurement System Introduction: The IVS800 fully automatic viscosity measurement system uses a Z-type Ubbelohde viscometer to achieve the entire process of automatic sampling, automatic testing, automatic calculation, automatic cleaning, and automatic drying, freeing up experimental personnel and opening up a new era of viscosity measurement. It can be widely used for viscosity testing of polymer materials such as polyester PET, PBT, PBAT nylon PA6, PA66, polycarbonate PC, polyvinyl chloride PVC, polyacrylonitrile PAN, polyacrylamide PAM, polyvinylidene fluoride PVDF, organosilicon, organic glass PMMA, polylactic acid PLA, PGA, cellulose CA, MCC, etc. Characteristics: 1. Place the prepared sample into the sample tray and automatically complete the entire experiment; 2. No need to disassemble the viscosity tube, measurement, cleaning and other programs are automatically completed; 3. Batch constant temperature of samples significantly reduces experimental time and improves testing efficiency; 4. Each workstation is equipped with six automatic samplers with filtering function, and the sample chamber has insulation function. 5. QDS/LIMS interface, experimental data can be automatically uploaded. 6. Fully automated operation, reducing personnel exposure to chemical reagents; 7. Closed system, automatic collection of waste liquid and exhaust gas, greatly reducing the harm of harmful gases to people. 8. Imported high-precision temperature control module, temperature uniformity and fluctuation ≤ ± 0.01 ℃, constant temperature bath temperature control adopts PID temperature control regulation, high-precision glass thermometer real-time monitoring; 9. The measurement area and temperature control area of the constant temperature bath are separated to make the temperature field in the measurement area more stable; 10. Adopting rigid stainless steel optical fiber, stable optical path and precise timing; 11. Multi channel all-round automatic cleaning, computer software controls the entire cleaning process and parameter settings. And it has an independent waste liquid collection system, with 2 independent waste liquid bottles for each measuring position. The waste liquid is collected separately, and the hardware and software parts of the measuring position discharge are all independent, allowing for simultaneous discharge of waste liquid. Solvent waste liquid and organic waste liquid can be collected separately to ensure experimental safety Technical parameters: Model: IVS800 Sample dissolution method: 15-90 ° C Sample bottle capacity (optional): 1-6 positions available Display accuracy: 0-9999.99 seconds Temperature control accuracy: 20-80 ℃ Timing range: 0.019-7.60 dl/g Temperature range: ≤± 0.01 ℃ Temperature uniformity: ≤± 0.01 ℃ Sample disk temperature control accuracy: ± 1 ℃ Timing accuracy: 0.001 s (digital display) Characteristic viscosity repeatability: ≤± 0.0020 dl/g Sample tray: 50ml * 6 positions Measurement range: 0.3... 100000 mm2/s Resolution: 0.0001 s Reproducibility of intrinsic viscosity: 0.0040dl/g Test positions: 2-6 (optional)
Introduction: The IVS800 fully automatic viscosity measurement system uses a Z-type Ubbelohde viscometer to achieve the entire process of automatic sampling, automatic testing, automatic calculation, automatic cleaning, and automatic drying, freeing up experimental personnel and opening up a new era of viscosity measurement. It can be widely used for viscosity testing of polymer materials such as polyester PET, PBT, PBAT nylon PA6, PA66, polycarbonate PC, polyvinyl chloride PVC, polyacrylonitrile PAN, polyacrylamide PAM, polyvinylidene fluoride PVDF, organosilicon, organic glass PMMA, polylactic acid PLA, PGA, cellulose CA, MCC, etc.
