Introduction: Cardboard adhesion strength peel test machine is a new type of high-precision testing equipment developed and researched by our company according to the national standards. The paper ring crush strength tester is mainly suitable for paper thickness crush strength of 0.15 ~ 1.00mm (RCT); corrugated board edge pressure strength (ECT), crush strength (FCT), adhesion strength (PAT) and diameter less than 60mm paper core crush strength (CMT) test, is currently a very high cost of a high-precision cardboard bond strength tester. The instrument for the mechatronic structure, the use of modern mechanical design concepts and computer processing technology for careful and reasonable design. Instrument used on the plate fixed, high accuracy. The instrument has the parameters of the standard test, conversion, regulation, memory, pressure curve real-time display, data printing and other functions. Has a powerful data processing capabilities, can be directly derived from the statistical results of the data, and can automatically reset, easy to operate, easy to adjust, stable performance. Mainly used in paper, paperboard, sheet, pipe and other side pressure, ring pressure, adhesive strength and the crush strength of paper tubes, pressure test of small objects, packaging, plastic sheeting, cardboard and corrugated board manufacturer and The relevant research institutes, testing organizations indispensable important test equipment. Features: 1, The structural parameters of the instrument and the technical parameters are in line with the relevant technical regulations of GB2679.8, GB6546, GB6548, GB2679.6 and other standards. 2, the main machine and control box separation; transmission part of the worm gear reducer and synchronous motor combination structure. 3, The instrument has the parameters of the standard test, conversion, adjustment, display, memory, print function, with data processing capabilities, can be directly derived from the statistical results of the data, but also has over-range protection and fault self-diagnostic function. 4, full computer control technology, open structure, high automation program, easy operation, safe and reliable. 5, The instrument adopts domestic and foreign advanced components, ancillary components, single-chip microcomputer, reasonable structure and multi-functional design. According to the test requirements to automatically complete the test items. Single-chip microcomputer by changing the direction of motor operation, to change the direction of the screw nut drive, down to the board to move up and down. At the same time, set in the travel range limit protection control switch, protecting the pressure sensor. 6, the system through the high-precision pressure sensor to measure the peak force and maintain, store, and statistics of the same group of multiple experimental data samples, the same group of samples can be calculated maximum, minimum, average, standard deviation and variation Coefficient, these data are stored in the data memory, and can be displayed on the LCD screen. 7, the use of modular integrated printer, easy installation, low failure; thermal printers, high-speed micro-printer, print high-speed, easy to use, lower failure Technical Parameters: Power: AC220V ± 10% 2A 50Hz; Indication error ± 1%; Indication variation <1%; Resolution: 0.1N Measuring range (5 ~ 5000) N; Platen parallelism ≤ 0.05 mm Working schedule (1 ~ 70) mm Test speed (12.5 ± 2.5) mm / min Park pressure plate diameter 235mm Man-machine interface in English menu; LCD display Print out the modular thermal printer Working environment Indoor temperature (20 ± 10) ° C; relative humidity <85% Dimensions (530x350x580) mm (length × width × height); Weight about 55kg
