Brief introduction: HG-2800 single, double and four-channel on-line vibration monitor is a simple system specially used for on-line vibration monitoring of equipment. It can monitor the displacement, speed and acceleration of vibration of various rotating machinery and equipment online for a long time, and has the function of over-limit alarm. It is very suitable for the simple on-line monitoring of the vibration state of various fans, motors, pumps, steam turbines, air compressors, machine tools and other equipment in industrial and mining enterprises, and can distinguish the equipment fault types according to the monitoring numerical diagnosis of different vibration parameters. It is a low-cost on-line monitoring solution for vibration. Performance index: Type of sensor: ICP acceleration sensor Maximum signal distance of sensor: 100 (m) Acceleration measurement range: 0.1 ~ 199.9m/s2 (0 ~ P) Speed measurement range: 0.1 ~ 199.9mm/s (RMS) Displacement measurement range: 0.001 ~ 1.999mm (P ~ P) Vibration frequency range: low frequency: 10Hz ~ 1KHz (acceleration, velocity, displacement) High frequency 1KHz ~ 10KHz (acceleration) Alarm: each channel independent relay alarm suction (normally open and normally closed optional) Relay load: 0.6a. @125vac 2 a 30 VDC @ 0.5 A @ 110 VDC Alarm threshold: each channel is set independently and freely; Configuration: 1, 2, 4 channels, four channels for each channel rotation display; Power supply: ac 220V(dc 24V optional) Communication interface (with communication protocol)
Brief introduction: HG-2800 single, double and four-channel on-line vibration monitor is a simple system specially used for on-line vibration monitoring of equipment. It can monitor the displacement, speed and acceleration of vibration of various rotating machinery and equipment online for a long time, and has the function of over-limit alarm. It is very suitable for the simple on-line monitoring of the vibration state of various fans, motors, pumps, steam turbines, air compressors, machine tools and other equipment in industrial and mining enterprises, and can distinguish the equipment fault types according to the monitoring numerical diagnosis of different vibration parameters. It is a low-cost on-line monitoring solution for vibration.
