Sales GOLDM-41FB type explosion-proof laser rangefinder，Manufacturer

Position: Home > > Measurement instrument > Length measuring instrument > laser range finder > GOLDM-41FB type explosion-proof laser rangefinder

GOLDM-41FB type explosion-proof laser rangefinder

Product ID：CLCDcjy007

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberGOLDM-41FB

Brand NameBJHMDZ

Payment TermsT/T, paypal

Brief introduction:
Goldm-41fb type explosion-proof laser rangefinder is mainly used for the measurement of material level, material level and liquid level in the explosive gas environment of area 1 or 2 IIC type T6 and below.
Features:
Is applicable to areas 1, 2 IIC type T6 and below in explosive gas environment
Measurement range up to 150 meters, work stable and reliable
Adopts the principle of phase difference, the measurement accuracy is high, and the repeat precision can reach + / - 0.5mm
Programmable analog 4-20mA output (three-wire system) for easy field setting
Operating voltage range of 10-30v, less than 1.5w power consumption
Rs232/422 serial port for instrument debugging and signal output
USES a red laser that is easy to target and easy to adjust for maintenance.
Meter with signal strength indicator function!
You can check the working status of the meter and modify the parameters of the meter by using a laptop or hand controller
Aluminum enclosure with mounting bracket and explosion proof junction box for open mounting
Technical parameters:

Explosion proof mark	Ex dICt6Gb,	Product standard	QBFB01-2016
Measuring range	0.1-150m	Measurement accuracy	±1-2mm
Resolution ratio	0.1mm	Repeatability precision	±0.5mm
Measuring time	1-10Hz	Service voltage	10V-30VDC, polarity protection, power consumption < 1.5W
Working temperature	-10-50℃	Measuring laser	Wavelength 650nm (red), divergence angle 0.6mrad
Storage temperature	-20℃-70℃	Laser grade	Level 2, don't look straight at the laser
Data interface	RS232/RS422 (convertible), baud rate 9600U ACII 8n1	Adapting piece	12 pin M18 male head, cable length 2 m, other length optional
Analog output	4-20 Ma, load impedance ≤ 500, accuracy: ±0.15, temperature drift < 50ppm/K	Sensor size	450x 185X195mm (including bracket), 125mm diameter, 4XM10 mounting hole
levels of protection	P65, cast aluminum housing	Weight	8kg (including cables and mounting supports)

Brief introduction:
Goldm-41fb type explosion-proof laser rangefinder is mainly used for the measurement of material level, material level and liquid level in the explosive gas environment of area 1 or 2 IIC type T6 and below.