F800 fiber tester

Product ID:SYFLCQct024

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberF800
    Brand NameJINANHAINENG
    Payment TermsTT,PAYPAL
    F800 fiber tester
    Introduction:
    F800 is a semi-automatic fiber detection instrument with novel design, simple operation, and flexible application, which can be used for traditional Wendell method detection of crude fibers and paradigm method detection of washed fibers. It is applicable to the determination of crude fiber in plants, feeds, food and other agricultural and sideline products, as well as the test of washing fiber, cellulose, hemicellulose and other relevant parameters. The results comply with the provisions of GB/T5515 and GB/T6434.
    Optional peripheral accessories: cold extraction device. Steps such as pre-treatment of samples with high fat content that require degreasing, acetone washing after extraction, and lignin detection can be carried out.
    characteristic:
    1. The solvent barrel pull-out structure design is convenient for liquid addition operation, solving the problem of difficulty in replenishing reagents on the top of the chassis of traditional fiber measuring instruments
    2. Corrosive liquids do not come into contact with any pump body, avoiding the phenomenon of traditional structures where waste pumps are prone to corrosion
    3. The design of the crucible recoil function prevents the sample from caking in the crucible and cannot be filtered
    4. It has the function of preventing excessive liquid addition and overflow, preventing corrosive liquid from overflowing due to incorrect operation during liquid addition, and protecting the safety of operators
    5. Adjust the heating power of the crucible at any time, making it convenient for customers to control the heating speed and reducing energy consumption
    6. Equipped with built-in pre heating function, greatly shortening the entire experimental process
    7. Five specifications of crucible are standard to meet the needs of different samples
    8. Detect crude fiber, washing fiber, hemicellulose, cellulose, lignin and other substances
    Technical parameters:
    Measurement range: 0.1%~100%
    Sample weight measurement: 0.5g-3g
    Repeatability error: Coarse fiber content below 10%, ≤ 0.4%
    Coarse fiber content above 10%, ≤ 1%
    Processing capacity: 6 pieces/batch
    Distilled water preheating time: 10-12 minutes
    Boiling time: 13-15 minutes
    Rated power: 2.2KW
    Power supply: 220 VAC ± 10% 50Hz
    Boundary dimension: 776mm × 476mm × 644mm

  • Introduction:
    F800 is a semi-automatic fiber detection instrument with novel design, simple operation, and flexible application, which can be used for traditional Wendell method detection of crude fibers and paradigm method detection of washed fibers. It is applicable to the determination of crude fiber in plants, feeds, food and other agricultural and sideline products, as well as the test of washing fiber, cellulose, hemicellulose and other relevant parameters. The results comply with the provisions of GB/T5515 and GB/T6434.
    Optional peripheral accessories: cold extraction device. Steps such as pre-treatment of samples with high fat content that require degreasing, acetone washing after extraction, and lignin detection can be carried out.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com