Introduction: Designed for drying heat-sensitive, easily decomposable and easily oxidizable materials, the vacuum oven can be filled with inert gas, especially for some reconstituted items. Widely used in the pharmaceutical, electronics and chemical industries. DZF-6210 with timing function digital microscope temperature controller, accurate and reliable temperature control. The protection system consists of over temperature protection and alarm devices. The integrity of the components and test pieces is guaranteed. Features: 1. With the timing function, the micro-computer temperature controller is accurate and reliable. 2. The rectangular body studio maximizes the effective volume. 3. The tempered and bulletproof double-glazed doors observe the objects in the working room at a glance. 4. The door can be closed tightly and can be adjusted. The integrally formed silicone rubber sealing ring ensures high vacuum inside the box. 5. The studio is made of stainless steel (or wire drawing). Make sure the product is durable. 6. Equipped with three shelves, with independent temperature control function, can not be disassembled. 7. Equipped with a dedicated vacuum pump. Technical Parameters 1, temperature range: RT + 10 ° C ~ 250 ° C 2. Control accuracy: ±1% (full scale) 3. Constant temperature fluctuation: ± 1 ° C 4. Temperature resolution: 0.1 °C 5. Heating rate: 1.0 ~ 2.0 ° C / min 6. Temperature timing range: 1-9999min (please specify when ordering for minutes or hours) 7. Power supply voltage: AC220V / 50Hz 8. Reach vacuum: 0~-0.08Mpa 9. Total power: 2200W
