Introduction: New structure, integrated structure. Unilateral take samples, air intake, temperature measurement. Exhaust end can be equipped with automatic cleaning bottle, cleaning bottle users can replace, but also through the instrument window to observe the gas reaction. The inlet end of the double-seal structure of the seal, to ensure the purity of gas, sealed valve standard air-cooled. During the experiment, the sample can be cooled internally to improve the experimental efficiency. Furnace with double wire wound heating, heating more uniform, and anti-aging. Features: 1. Unilateral sample release, intake, temperature measurement. 2.Exhaust end can be equipped with automatic cleaning bottle, cleaning bottle users can replace, but also through the instrument window to observe the gas reaction. 3. The intake end of the double seal structure seal, to ensure the purity of gas, sealed valve standard air-cooled. 4. During the test sample can be cooled inside to improve the experimental efficiency. 5 furnace with double wire around the wire heating, heating more uniform, and anti-aging. Avoid the disadvantages of open-lid furnaces. 6. Furnace cooling with independent fan cooling to speed up the cooling rate and improve cooling efficiency. 7. The process of sampling take-off is simple, the use of rail pull-out, through the support rail, the sample directly. No need to open the sealing valve, without using other sampling tools to reduce the error of many aspects. 8. Atmosphere control, program switching, but also manually through the touch screen to switch to make the operation more intelligent and more convenient. 9. Select the appropriate combustion crucible, multiple samples for testing. 10. Sample combustion boat rail support, located in the center of the furnace heating core to ensure uniform heat around the sample, the test accuracy is higher. Avoid the traditional combustion boat placed directly on the test tube, the drawbacks of uneven heating. 11. Sample Burning Vessel Injectors are calibrated and custom-made to ensure that the same requirements are placed on the position of the sample in a repetitive test, just as it is for each insertion into the furnace. The traditional carbon black content tester, to make their own mark, observe and then adjusted, leading to low efficiency, poor repeatability. Technical Parameters: 1. Display: high-definition 7-inch capacitive touch screen display 2. Tube size: Ф45 × 450mm 3. Heating element: high temperature nickel-chromium wire 4. Heating zone length: 300mm 5. Temperature zone length: 200mm 6. Operating temperature: ≤ 1100 ℃ 7. The maximum temperature: 1200 ℃ 8 temperature control mode: intelligent 50 programmable control 9. Temperature accuracy: ± 0.5 ℃ Sensitivity: 0.1 ℃ 11. Heating rate: 1 ℃ ~ 50 ℃ / min 12. Machine power: ≤ 1KW 13. Working voltage: AC220V / 50HZ / 60HZ Atmosphere: two 15. Atmosphere switch: fully automatic
