DW-02 point temperature tester Introduction
According to the national standard GB4610-84 "Plastics burning performance test method - measuring the temperature" to compare the combustion characteristics of various materials under specific conditions. Technical Parameters
1. Single-chip control, easy to use and maintain
2. Copper ingot furnace has a diameter of 100mm and a height of 100mm. There are 4 container holes.
3. The stainless steel container has an inner diameter of 9 mm, a height of 48 mm, and a wall thickness of 1 mm, and has a cap with a length of 10 mm and an inner diameter of 1.5 mm.
4. Voltage and power: 220V ± 10% V, 50HZ, power about 500W
5. Butane igniter inner diameter 0.8mm ± 0.1mm nozzle, flame height 10mm-20mm can be adjusted arbitrarily.
6. Copper ingot furnace can be constant at any temperature between (150-450) °C
Introduction
According to the national standard GB4610-84 "Plastics burning performance test method - measuring the temperature" to compare the combustion characteristics of various materials under specific conditions.
