1 Sales DDG-3090 Industrial Conductivity Meter manufacturer
Position: Home > > Industrial on-line and process control > Online electrical conductivity meter > DDG-3090 Industrial Conductivity Meter for used in chemical fertilizer monitoring

DDG-3090 Industrial Conductivity Meter for used in chemical fertilizer monitoring

Product ID:ZXDD001

Price: Please inquire PDF Format
Supply Ability:100sets/mon
Port:shenzhen
share:
  • Product Introduction
  • Consulting
  • Model NumberDDG-3090
    Brand NameYIMA
    Payment TermsT/T, paypal
    Technical indicators:
    Measuring range: 0.01 ~ 20ms / cm (with K = 0.01 electrode); 0.1 ~ 200ms / cm (with K = 0.1 electrode);
                  1.0 ~ 2000ms / cm (with K = 1.0 electrode); 10 ~ 20000ms / cm (with K = 10.0 electrode);
    Resolution: 0.01 uS / cm
    Accuracy: ± 1.0% FS, ± 0.3
    Temperature compensation: 0 ~ 65.0
    Output signal: current 4 ~ 20 mA (RL £ 500) or 0 ~ 5v
    Communication interface: RS485
      Alarm: normally open relay contact: 3A / AC220V;
    Operating voltage: AC220V ± 22V, 50Hz ± 1Hz;
    Size: 96 × 96 × 110mm hole size: 92x92mm
    Instrument working conditions: Ambient temperature: 5 ~ 60
    According to the size of the measured water sample resistivity range, the optional electrode constant is K = 0.01,0.1
    , 1.0 or 10 of the electrode, the use of flow, sink, flange or pipe installation.

  • Technical indicators:
    Measuring range: 0.01 ~ 20ms / cm (with K = 0.01 electrode); 0.1 ~ 200ms / cm (with K = 0.1 electrode);
                  1.0 ~ 2000ms / cm (with K = 1.0 electrode); 10 ~ 20000ms / cm (with K = 10.0 electrode);
    Resolution: 0.01 uS / cm
    Accuracy: ± 1.0% FS, ± 0.3
    Temperature compensation: 0 ~ 65.0
    Output signal: current 4 ~ 20 mA (RL £ 500) or 0 ~ 5v
    Communication interface: RS485
      Alarm: normally open relay contact: 3A / AC220V;
    Operating voltage: AC220V ± 22V, 50Hz ± 1Hz;
    Size: 96 × 96 × 110mm hole size: 92x92mm
    Instrument working conditions: Ambient temperature: 5 ~ 60
    According to the size of the measured water sample resistivity range, the optional electrode constant is K = 0.01,0.1
    , 1.0 or 10 of the electrode, the use of flow, sink, flange or pipe installation.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com