Introduction: Photocatalytic xenon light sources are widely used in photolysis of water to produce hydrogen and oxygen, CO2 reduction, photothermal catalysis, photothermal synergy, photochemical catalysis, photochemical synthesis, photodegradation of pollutants, water pollution treatment, biological illumination, optical detection, and various simulated sunlight Visible light acceleration experiment, ultraviolet wave band acceleration experiment and other research fields. Main applications: Photocatalytic xenon light sources are widely used in photolysis of water to produce hydrogen and oxygen, CO2 reduction, photothermal catalysis, photothermal synergy, photochemical catalysis, photochemical synthesis, photodegradation of pollutants, water pollution treatment, biological illumination, optical detection, various Similar to the research fields of simulated sunlight and visible light acceleration experiment, ultraviolet wave band acceleration experiment and so on. Features: 1. CEL-PF300-T9 is integrated with the power supply and the light box, and the external size is only 320*243*150mm; 2. The new power supply and the trigger module are integrally formed to reduce a large number of lines and greatly reduce the failure rate; 3. The trigger voltage of the new power supply is one-half of the original (15KV), which greatly reduces interference to the outside world; 4. The bulb adopts the latest module heat dissipation structure to improve the stability of light output; 5. The PE300 bulb used can be quickly replaced by users without any wiring disassembly; 6. Adopt the latest optical path structure to realize multiple concentricity of bulbs, heat dissipation, isolation, flanges, etc.; 7. Adopt a new temperature control feedback system, which not only isolates high voltage, but also improves accuracy; 8. The standard turning lens can match all M62 and M52 filters, and the filters can be superimposed on multiple layers; 9. The T9 light source can be equipped with an electric lifting table LMP400 to realize convenient lifting adjustment; Technical Parameters: Average optical output power density: 0～20 Sun Luminous spectrum range: 300nm～2500nm Diameter of working spot: above 60mm UV output power: 2.6W Infrared zone output power 28.8W Visible light output: 5000Lu, 18.6W, 5600K Input power: 300W (lighting voltage 15KV, working voltage 14V) New 300W dedicated power supply Working current: 21A (10A～22A) Total luminous output power: 50W Lamp life: >1000H limit 6000H (dust and humid environment will seriously affect life) Light output index: Light stability: ±1% Temperature control system: The light source system adopts multi-point temperature monitoring to ensure the stable output of the light source; The fan speed delay is automatically adjusted according to the system temperature to stabilize the light output; Optional accessories: CEL-LMP400 automatic lifting table CEL-NP2000-2 Strong Light Optical Power Meter
Introduction: Photocatalytic xenon light sources are widely used in photolysis of water to produce hydrogen and oxygen, CO2 reduction, photothermal catalysis, photothermal synergy, photochemical catalysis, photochemical synthesis, photodegradation of pollutants, water pollution treatment, biological illumination, optical detection, and various simulated sunlight Visible light acceleration experiment, ultraviolet wave band acceleration experiment and other research fields. Main applications: Photocatalytic xenon light sources are widely used in photolysis of water to produce hydrogen and oxygen, CO2 reduction, photothermal catalysis, photothermal synergy, photochemical catalysis, photochemical synthesis, photodegradation of pollutants, water pollution treatment, biological illumination, optical detection, various Similar to the research fields of simulated sunlight and visible light acceleration experiment, ultraviolet wave band acceleration experiment and so on.
