CEL-LED100HA-96 Large Area LED Light Source Introduction: CEL-LED100HA-96 large-area LED light source, with an output spot of 108mm * 90mm, can meet the requirements of 96 well plate irradiation, microchannel photocatalytic reaction, and large-area photocatalytic experiments. It is widely used for high-throughput testing in the life sciences and chemical analysis industries in conjunction with 96 well cell culture plates or petri dishes for cell processing. LED light sources have high stability and monochromaticity in fields such as photocatalysis, photodegradation, battery testing, photoluminescence, biology, physical optics, dye chemistry, petrochemicals, photoelectrochemical testing, and reaction experiments, and have significant advantages over other light sources. Features: 1. All adopt high-power LED single plant uniform array; 2. High efficiency, energy consumption reduced by 80% compared to light sources with the same luminous efficiency; 3. Good monochromaticity, single spectrum, and consistent energy; 4. Realize the conversion of LED lamp head illumination direction through the bracket, achieving multi angle illumination; 5. Achieved a long lifespan, high stability, and high uniformity that other light sources find difficult to achieve; 6. It can achieve arbitrary adjustment of light output intensity and quickly stabilize it; 7. The heat dissipation of the light source is forced air cooling and the light path and air path are separated to ensure stable light output; 8. Control system to achieve multiple safe and stable controls Technical parameters: Optional band: Standard configuration: White LED; Optional wavebands: 365nm, 395nm, 405nm, 420nm, 455nm, 470nm, 500nm, 520nm, 590nm, 620nm, 660nm, 740nm, 850nm, 940nm, Half wave bandwidth FWHM: 20nm Control mode: digital display control, (voltage and current are displayed simultaneously) Total input power: 240W, AC220V, ± 0.01% Working current: ＜ 5.0A (0.01A) LED power consumption: ＜ 200W Light output area: 108mm * 90mm Irradiation unevenness: ＜ 5% Optical power density: ＜ 200MW/cm ² (CEL-NP2000 determination) Minimum service life: 10000 hours (excluding 365nm) Configuration: Standard: Digital display power supply, LED light box, LMP400 fully automatic lifting platform (horizontal+vertical illumination, travel 400mm) Specification: Light box: 180mm * 140mm * 103mm Power supply: 313mm * 128mm * 118mm
Introduction: CEL-LED100HA-96 large-area LED light source, with an output spot of 108mm * 90mm, can meet the requirements of 96 well plate irradiation, microchannel photocatalytic reaction, and large-area photocatalytic experiments. It is widely used for high-throughput testing in the life sciences and chemical analysis industries in conjunction with 96 well cell culture plates or petri dishes for cell processing. LED light sources have high stability and monochromaticity in fields such as photocatalysis, photodegradation, battery testing, photoluminescence, biology, physical optics, dye chemistry, petrochemicals, photoelectrochemical testing, and reaction experiments, and have significant advantages over other light sources.
