| Parameter | Specification |
|---|---|
| Model | CEL-FES300 |
| Light Source | 300W Xenon Lamp |
| Optical Power Density | 0–20 Sun |
| Overall Spectral Range | 300–2500 nm, without ozone |
| Working Spot Diameter | ≥60 mm |
| Fiber Square Spot Size | 10 × 10 mm to 60 × 60 mm |
| Square Spot Adjustment | Via focusing lens |
| Fiber Spot Uniformity | <5% for spot size <40 mm |
| Fiber Output Spectrum | 350–1100 nm |
| Solar Simulation | Built-in AM 1.5 simulated sunlight spectrum |
| Fiber Output Power Density | <1000 mW/cm² |
| 10 mm Spot | <1000 mW/cm² |
| 20 mm Spot | <500 mW/cm² |
| 40 mm Spot | <200 mW/cm² |
| 60 mm Spot | <100 mW/cm² |
| Electronic Shutter Accuracy | 0.01 s |
| UV Output | 2.6 W |
| IR Output | 28.8 W |
| Visible Output | 5000 lm / 18.6 W / 5600 K |
| Input Power | 300 W |
| Ignition Voltage | 15 kV |
| Operating Voltage | 14 V |
| Operating Current | 21 A (10–22 A) |
| Total Optical Output | 50 W |
| Lamp Life | >1000 h; maximum 6000 h |
| Fiber Output Stability | <±0.5% |
| Temperature Control | Multi-point temperature monitoring |
| Cooling Control | Automatic fan-speed adjustment according to system temperature |
| Feature | CEL-FES300 Multifunctional Fiber Optic Light Source | Conventional Xenon Light Source |
|---|---|---|
| Light Source | 300W xenon lamp | Xenon lamp |
| Optical Output | 0–20 Sun | Depends on system |
| Fiber-Optic Output | Yes | Not always available |
| Square Spot | 10 × 10 to 60 × 60 mm | Depends on configuration |
| AM 1.5 Simulation | Built-in fiber output | Depends on configuration |
| Fiber Output Spectrum | 350–1100 nm | Depends on optics |
| Fiber Output Stability | <±0.5% | Depends on system |
| Electronic Shutter | 0.01 s accuracy | Depends on system |
| Multi-Experiment Configuration | Designed for multiple applications | Usually application-specific |
| Typical Applications | PEC, solar cells, photocatalysis, pollutant degradation, water splitting, CO₂ reduction | General illumination and photocatalysis |