Cbs-b automatic part collector cbs-b automatic part collector is a new product developed by our factory according to the requirements of users and the advantages of foreign similar instrument. Compared with the original BSZ, BS series and other collectors, the cbs-b programmable automatic part collector has the characteristics of automatic tube alignment and resistance to organic solutions. Through the liquid crystal display and menu navigation instructions, it can carry out multi-function operation such as timing, tit-fixing, peak-fixing and program control collection, and it can select a variety of test tube dishes as required to realize multi-use and reduce the use cost. Because this instrument adopts programmed collection mode, the original single collection is improved. Technical parameters: 1. Display mode: LCD Chinese blue screen display 2. Collection tube: 100 (maximum capacity of each tube: 12ml with waste liquid tank) 3. Timing range: 1 second - 999 hours, 59 minutes and 59 seconds 4. Range of fixed drops: 1 drop -- 9999 drops are optional 5. Range of fixed peak (type B) : 1-200mv for arbitrary selection 6. Optional selection of program control range: 1-10 paragraphs 7. Moving mode: suspension x-y 8. Pipe changing control: 12V dc electromagnetic valve 9. Operation method: full Chinese menu type 10. Sequence number: 1 -- 10 / modes 11. Power outage data preservation: 10 years 12.Test tube tray: square design with waste liquid trough, free combination, optional (sp-169a, 36A, 16A type test tube rack, optional 36L tube stand for expansion collection) 13.Power supply voltage: AC220V plus or minus 1 %; 50 hz. 1 0 w 14. The use of the environment: 0-40 ℃ temperature humidity 85% or less 15.Continuous working time: over 200 hours. 16. Weight: 10kg 17. External dimension: 355 x 360 x 270mm Features: Unique menu operation process.According to the "simple operation flow chart" on the panel, the operation of various functions can be completed, and the operation is easy to use. Square design and mounted X - Y movement. The square design and the mounted x-y movement mode are adopted to ensure accurate positioning of pipe changing. Collect solution and circuit separation, use more safety; Corrosion resistant design. It is suitable for the column chromatography separation experiment of water-soluble and organic solvents. Programmable control. Microprocessor control, users can use the operating menu, according to the chromatographic map to compile the collection procedures; Various capacity collection and with waste liquid tank. A variety of test tube plates (sp-16a, sp-36a, sp-100a, sp-169a) are used freely to realize the multi-function of one machine. Selection (sp-36l) can realize continuous and infinite repeated collection, so as to further improve the efficiency of preparation. The waste liquid flows into the waste liquid tank automatically through the three-way valve and control procedure. Delay collection time can be set. The delayed collection time is programmed to compensate the time from the detector exit to the collection tube and to ensure that the sample flows into the corresponding test tube accurately. Solenoid valve change tube control. Control by electromagnetic valve to prevent leakage in the switching process.
Cbs-b automatic part collector cbs-b automatic part collector is a new product developed by our factory according to the requirements of users and the advantages of foreign similar instrument. Compared with the original BSZ, BS series and other collectors, the cbs-b programmable automatic part collector has the characteristics of automatic tube alignment and resistance to organic solutions. Through the liquid crystal display and menu navigation instructions, it can carry out multi-function operation such as timing, tit-fixing, peak-fixing and program control collection, and it can select a variety of test tube dishes as required to realize multi-use and reduce the use cost. Because this instrument adopts programmed collection mode, the original single collection is improved.
